Saltar al contenido principal

Introducción

The USB port allows you to connect other devices to the laptop. This guide will show you how to remove and replace the USB port.

Partes

No se especificaron partes.

  1. Remove the ten 7mm Phillips #0 screws from the bottom. Remove the ten 7mm Phillips #0 screws from the bottom.
    • Remove the ten 7mm Phillips #0 screws from the bottom.

  2. Insert a plastic opening tool under the bottom cover and slid it around the perimeter until all of the clips release. Insert a plastic opening tool under the bottom cover and slid it around the perimeter until all of the clips release.
    • Insert a plastic opening tool under the bottom cover and slid it around the perimeter until all of the clips release.

  3. Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now

    Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now
  4. Use a spudger to flip up the retaining flap on the  ribbon cable ZIF socket. Remove the ribbon cable from the socket.
    • Use a spudger to flip up the retaining flap on the ribbon cable ZIF socket.

    • Remove the ribbon cable from the socket.

  5. Remove the 5mm Phillips #0 screw from the USB port. Remove the USB port from the device.
    • Remove the 5mm Phillips #0 screw from the USB port.

    • Remove the USB port from the device.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Joseph

Miembro Desde 25/01/18

589 Reputación

6 Guías creadas

Equipo

USF Tampa, Team S20-G1, Passmore Spring 2018 Miembro de USF Tampa, Team S20-G1, Passmore Spring 2018

USFT-PASSMORE-S18S20G1

3 Miembros

6 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 5

Todo El Tiempo: 121