Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
Herramienta utilizada en este paso:Tweezers$4.99-
Power the laptop off.
-
Flip the laptop over and position it so the opening faces you.
-
Remove the rubber foot located near the opening side of the device using tweezers.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Unscrew the five 5-mm screws using the PH0 screwdriver.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Identify the HDMI port located in the side of the laptop opposite to the power button.
-
Insert the plastic opening tool into the divet of the back panel located above the HDMI port.
-
Pry along the laptop frame until the back panel comes loose.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Rotate the device so the opening faces you again.
-
Hold the back panel away from the laptop and remove the 4-mm screw using the PH0 screwdriver.
-
Lift the back panel gently.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Unplug the cable that connects the battery to the motherboard.
-
Detach the back panel, which still includes the battery.
-
-
Este paso está sin traducir. Ayuda a traducirlo
Herramienta utilizada en este paso:Tweezers$4.99-
Position the computer so the opening side faces you.
-
Remove the tape holding the WiFi module using tweezers.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Unplug the white and black wires by lifting them up by hand or using tweezers.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the 3-mm screw that holds the WiFi module to the motherboard using the PH0 screwdriver.
-
Cancelar: No complete esta guía.
Una persona más ha completado esta guía.