Saltar al contenido principal

Introducción

If the life of your battery is significantly shortened, it may be damaged or old. This guide can help you replace the battery by yourself!

  1. Power the laptop off. Flip the laptop over and position it so the opening faces you. Remove the rubber foot located near the opening side of the device using tweezers.
    • Power the laptop off.

    • Flip the laptop over and position it so the opening faces you.

    • Remove the rubber foot located near the opening side of the device using tweezers.

  2. Unscrew the five 5-mm screws using the PH0 screwdriver. Unscrew the five 5-mm screws using the PH0 screwdriver.
    • Unscrew the five 5-mm screws using the PH0 screwdriver.

  3. Identify the HDMI port located in the side of the laptop opposite to the power button. Insert the plastic opening tool into the divet of the back panel located above the HDMI port. Pry along the laptop frame until the back panel comes loose.
    • Identify the HDMI port located in the side of the laptop opposite to the power button.

    • Insert the plastic opening tool into the divet of the back panel located above the HDMI port.

    • Pry along the laptop frame until the back panel comes loose.

    • Do not pull the back panel too hard as the battery is still connected to the back panel and the motherboard. This can damage your device.

  4. Rotate the device so the opening faces you again. Hold the back panel away from the laptop and  remove the 4-mm screw using the PH0 screwdriver.
    • Rotate the device so the opening faces you again.

    • Hold the back panel away from the laptop and remove the 4-mm screw using the PH0 screwdriver.

    • This screw is fastening the battery to the laptop.

    • Lift the back panel gently.

  5. Unplug the cable that connects the battery to the motherboard. Detach the back panel, which still includes  the battery.
    • Unplug the cable that connects the battery to the motherboard.

    • Detach the back panel, which still includes the battery.

  6. Flip the back panel so the battery faces down. Remove the rubber foot with tweezers.
    • Flip the back panel so the battery faces down.

    • Remove the rubber foot with tweezers.

  7. Remove the 5-mm screw that is located underneath the rubber foot using the PH0 screwdriver. Lift the battery and detach it from the back panel.
    • Remove the 5-mm screw that is located underneath the rubber foot using the PH0 screwdriver.

    • Lift the battery and detach it from the back panel.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Luz Villegas

Miembro Desde 08/09/17

440 Reputación

4 Guías creadas

Equipo

CSU Fullerton, Team S1-G4, Bruce Fall 2017 Miembro de CSU Fullerton, Team S1-G4, Bruce Fall 2017

CSUF-BRUCE-F17S1G4

3 Miembros

6 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 2

Últimos 7 Días: 12

Últimos 30 Días: 47

Todo El Tiempo: 1,063