Saltar al contenido principal

Introducción

This guide will show how to remove the small back plate on your netbook. The removal of the plate is necessary to access your netbook’s RAM.

Partes

No se especificaron partes.

  1. Press the power button to turn off the netbook.
    • Press the power button to turn off the netbook.

  2. Place the netbook bottom-side-up on a flat surface.
    • Place the netbook bottom-side-up on a flat surface.

    • Locate the unlock latch on the top right corner of the back.

  3. To unlock the battery, slide the lock latch in the direction indicated by the unlocking icon. You should see the orange indicator which means that the latch is unlocked.
    • To unlock the battery, slide the lock latch in the direction indicated by the unlocking icon. You should see the orange indicator which means that the latch is unlocked.

  4. Kits de Reparación de Android

    A new screen or battery is one kit away.

    Comprar Ahora

    Kits de Reparación de Android

    A new screen or battery is one kit away.

    Comprar Ahora
  5. On the opposite side, slide and hold the release latch. Gently slide the battery out. Gently slide the battery out.
    • On the opposite side, slide and hold the release latch.

    • Gently slide the battery out.

  6. Use the #0 Phillips Screw bit with the Screwdriver to remove the single 6mm Phillips screw from the small back plate.
    • Use the #0 Phillips Screw bit with the Screwdriver to remove the single 6mm Phillips screw from the small back plate.

  7. Use the plastic opening tool on the recessed notch at the bottom of the small plate to gently lift the plate up
    • Use the plastic opening tool on the recessed notch at the bottom of the small plate to gently lift the plate up

  8. Once the plate becomes unhinged, gently rotate the plate to take it of of the device. Once the plate becomes unhinged, gently rotate the plate to take it of of the device.
    • Once the plate becomes unhinged, gently rotate the plate to take it of of the device.

  9. Using two fingers, gently spread the latches on the sides of the RAM card until the RAM card props up. Using two fingers, gently spread the latches on the sides of the RAM card until the RAM card props up.
    • Using two fingers, gently spread the latches on the sides of the RAM card until the RAM card props up.

  10. Once the RAM card is propped up, carefully pull it out of its port. Once the RAM card is propped up, carefully pull it out of its port.
    • Once the RAM card is propped up, carefully pull it out of its port.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Jair Burgos

Miembro Desde 15/09/16

425 Reputación

3 Guías creadas

Equipo

USF Tampa, Team 11-6, Blackwell Fall 2016 Miembro de USF Tampa, Team 11-6, Blackwell Fall 2016

USFT-BLACKWELL-F16S11G6

3 Miembros

12 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 1

Últimos 30 Días: 3

Todo El Tiempo: 249