Introducción

In this guide, you will be replacing the power jack, which is independently secured without the use of any internal screws.

Partes

No se requieren partes.

  1. Use a Phillips #1 screwdriver to remove all eighteen 2.12 mm screws from the back plate of your Acer Aspire.
    • Use a Phillips #1 screwdriver to remove all eighteen 2.12 mm screws from the back plate of your Acer Aspire.

  2. ¡Envío gratuito para todos los pedidos de más de USD100 o que contengan un Pro Tech Toolkit!

    Visita Nuestra Tienda
  3. Use the spudger to remove the back plate in the highlighted area to carefully pop out the back plate. Use the spudger to remove the back plate in the highlighted area to carefully pop out the back plate.
    • Use the spudger to remove the back plate in the highlighted area to carefully pop out the back plate.

  4. Unplug the power jack from the receptor port on the motherboard, highlighted in red. Remove the power jack from designated area on the side of the computer, highlighted in orange.
    • Unplug the power jack from the receptor port on the motherboard, highlighted in red.

    • Remove the power jack from designated area on the side of the computer, highlighted in orange.

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 2

Todo El Tiempo: 85