Saltar al contenido principal

Introducción

A faulty power jack may be causing your laptop to not charge properly, and it may need to be replaced. This guide will help you through this process.

  1. Make sure the laptop is powered off. Flip the laptop over and locate the battery release switch.
    • Make sure the laptop is powered off.

    • Flip the laptop over and locate the battery release switch.

    • Insert the pointed end of the spudger into the battery release switch.

    • Push the battery release switch to the right.

  2. While  the battery release switch is pushed to the right, carefully slide the battery out of its socket. While  the battery release switch is pushed to the right, carefully slide the battery out of its socket. While  the battery release switch is pushed to the right, carefully slide the battery out of its socket.
    • While the battery release switch is pushed to the right, carefully slide the battery out of its socket.

  3. Remove the top panel of the laptop with the plastic opening tool. Remove the top panel of the laptop with the plastic opening tool. Remove the top panel of the laptop with the plastic opening tool.
    • Remove the top panel of the laptop with the plastic opening tool.

  4. Kits de Reparación de Batería de iPhone

    Sólo $29.99

    Buy Now

    Kits de Reparación de Batería de iPhone

    Sólo $29.99

    Buy Now
  5. Remove the plastic safeguard from the CD drive slot. Remove the plastic safeguard from the CD drive slot.
    • Remove the plastic safeguard from the CD drive slot.

  6. Remove the marked screws with the JIS #00 screwdriver. Remove the marked screws with the JIS #00 screwdriver. Remove the marked screws with the JIS #00 screwdriver.
    • Remove the marked screws with the JIS #00 screwdriver.

  7. Disconnect the opposite end of the power jack from the motherboard by carefully pulling the wire. Disconnect the opposite end of the power jack from the motherboard by carefully pulling the wire.
    • Disconnect the opposite end of the power jack from the motherboard by carefully pulling the wire.

  8. Lift the bottom right side of the screen to move the metal plate covering the power jack. Lift the bottom right side of the screen to move the metal plate covering the power jack.
    • Lift the bottom right side of the screen to move the metal plate covering the power jack.

  9. Carefully lift the power jack out of the laptop. Carefully lift the power jack out of the laptop.
    • Carefully lift the power jack out of the laptop.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Aliana Johnson

Miembro Desde 24/10/18

133 Reputación

1 Guía escrita

Equipo

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 9

Todo El Tiempo: 90