Saltar al contenido principal

Introducción

This guide will provide steps to replace the hard drive of a Acer Aspire E1-532-2616.

Partes

No se especificaron partes.

  1. Use a Phillips screwdriver to remove the  CM2.5*3 screw on the shown cover. Lift and remove the cover from the side that had the holdinging screw.
    • Use a Phillips screwdriver to remove the CM2.5*3 screw on the shown cover.

    • Lift and remove the cover from the side that had the holdinging screw.

    • Lifting the plastic cover will require some pressure.

  2. Kits de Reparación de Batería de iPhone

    Sólo $29.99

    Buy Now

    Kits de Reparación de Batería de iPhone

    Sólo $29.99

    Buy Now
  3. Unscrew the two  CM2*3-4 screws that attach the hard drive to the Laptop.
    • Unscrew the two CM2*3-4 screws that attach the hard drive to the Laptop.

  4. Push the hard drive away from where the screws were (to the left, if referring to the picture). The hard drive will slide to the left, allowing it to be safely removed.
    • Push the hard drive away from where the screws were (to the left, if referring to the picture).

    • The hard drive will slide to the left, allowing it to be safely removed.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Hello! Is it possible to recover data from it? My laptop is dead and I don't know how I could recover my files.. I'm not good in computers :D thank you in advance!

Andri HaiHui - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 1

Últimos 7 Días: 7

Últimos 30 Días: 41

Todo El Tiempo: 448