Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Turn off the laptop and disconnect all device cords.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use your finger or a spuger to pull the battery release switch.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove nineteen screws from the back panel using a Phillips #0 Screwdriver .
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Run the plastic opening tool across from one corner to another along the edge.
-
Separate the keyboard panel gently.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Disconnect the two keyboard assembly ribbon cables from motherboard.
-
To release small ribbon cable, use spudger or fingers to flip gray bar along edge over.
-
To release larger ribbon cable, use pry tool or spudger to slide white plastic clip forward.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Pull up the release tab beside the hard drive.
-
Disconnect portion of ribbon cable that is covering the hard drive.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the hard drive screw using Phillips #0 Screwdriver.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Pull the hard drive out gently. Be aware that it is connected to the adapter.
-
Gently remove adapter by pulling on both ends simultaneously to separate it from the hard drive.
-
Cancelar: No complete esta guía.
3 personas más completaron esta guía.