Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Turn off the laptop and disconnect all device cords.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use your finger or a spuger to pull the battery release switch.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Locate the screws connected to the hinge of the laptop. Small, black stickers hide them from immediate view.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
On both corners, use tweezers to remove small plastic sticker hiding the screws.
-
Remove screws using Phillips #0 screwdriver.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Turn the laptop over and open it up.
-
Using a prying tool, run along all edges of the display to pry the front face plate from the cover.
-
Use your fingers to pull the LCD panel and faceplate from the backing.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
LCD with faceplate should separate, be careful not to pull completely away because there is a cable still attached to the display.
-
Carefully peel tape away from cable lead and separate cable from LCD panel.
-
Un comentario
Need more guide how to safe instal lcd, cause peel tape and need new one.. Overall good and detail love it