Saltar al contenido principal

Introducción

Use this guide to replace the LCD and faceplate of your Acer Aspire E1-470P-6659.

  1. Turn off the laptop and disconnect all device cords.
    • Turn off the laptop and disconnect all device cords.

  2. Flip the laptop over so the bottom is facing you.
    • Flip the laptop over so the bottom is facing you.

  3. Insert the tip of the Plastic #3 Spudger into the battery release switch. Insert the tip of the Plastic #3 Spudger into the battery release switch.
    • Insert the tip of the Plastic #3 Spudger into the battery release switch.

  4. Press down and slide to the right and hold in that position.
    • Press down and slide to the right and hold in that position.

  5. Kits de Reparación de Batería de iPhone

    Sólo $29.99

    Buy Now

    Kits de Reparación de Batería de iPhone

    Sólo $29.99

    Buy Now
  6. Take your other hand to slide the battery away from the laptop to remove. Take your other hand to slide the battery away from the laptop to remove. Take your other hand to slide the battery away from the laptop to remove.
    • Take your other hand to slide the battery away from the laptop to remove.

  7. Locate the screws connected to the hinge of the laptop. Small, black stickers hide them from immediate view.
    • Locate the screws connected to the hinge of the laptop. Small, black stickers hide them from immediate view.

  8. On both corners, use tweezers to remove small plastic sticker hiding the screws. Remove screws using Phillips #0 screwdriver. Remove screws using Phillips #0 screwdriver.
    • On both corners, use tweezers to remove small plastic sticker hiding the screws.

    • Remove screws using Phillips #0 screwdriver.

  9. Turn the laptop over and open it up. Using a prying tool, run along all edges of the display to pry the front face plate from the cover. Use your fingers to pull the LCD panel and faceplate from the backing.
    • Turn the laptop over and open it up.

    • Using a prying tool, run along all edges of the display to pry the front face plate from the cover.

    • Use your fingers to pull the LCD panel and faceplate from the backing.

  10. LCD with faceplate should separate, be careful not to pull completely away because there is a cable still attached to the display. Carefully peel tape away from cable lead and separate cable from LCD panel. Carefully peel tape away from cable lead and separate cable from LCD panel.
    • LCD with faceplate should separate, be careful not to pull completely away because there is a cable still attached to the display.

    • Carefully peel tape away from cable lead and separate cable from LCD panel.

  11. Remove the LCD Panel and faceplate from the device.
    • Remove the LCD Panel and faceplate from the device.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Joel Humes

Miembro Desde 22/10/18

121 Reputación

1 Guía escrita

Equipo

UC Davis, Team S4-G5, Lore Fall 2018 Miembro de UC Davis, Team S4-G5, Lore Fall 2018

UCD-LORE-F18S4G5

3 Miembros

5 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 2

Últimos 30 Días: 4

Todo El Tiempo: 60