Saltar al contenido principal
  1. Este paso está sin traducir. Ayuda a traducirlo

    Unscrew the thirteen 6.2mm Phillips #1 screws located on the bottom of the device. Unscrew the thirteen 6.2mm Phillips #1 screws located on the bottom of the device.
    • Unscrew the thirteen 6.2mm Phillips #1 screws located on the bottom of the device.

  2. Este paso está sin traducir. Ayuda a traducirlo

    Lift the back panel using a plastic opening tool.  Slowly make your way around the device until the back panel comes off. Lift the back panel using a plastic opening tool.  Slowly make your way around the device until the back panel comes off. Lift the back panel using a plastic opening tool.  Slowly make your way around the device until the back panel comes off.
    • Lift the back panel using a plastic opening tool. Slowly make your way around the device until the back panel comes off.

  3. Este paso está sin traducir. Ayuda a traducirlo

    Press and hold the small black button located on the motherboard just above the battery for five seconds. Press and hold the small black button located on the motherboard just above the battery for five seconds.
    • Press and hold the small black button located on the motherboard just above the battery for five seconds.

  4. Este paso está sin traducir. Ayuda a traducirlo

    Using two plastic opening tools tightly grab the connector going from the battery to the motherboard and pull to unplug. Using two plastic opening tools tightly grab the connector going from the battery to the motherboard and pull to unplug. Using two plastic opening tools tightly grab the connector going from the battery to the motherboard and pull to unplug.
    • Using two plastic opening tools tightly grab the connector going from the battery to the motherboard and pull to unplug.

  5. Este paso está sin traducir. Ayuda a traducirlo

    Unscrew two 6.2 mm Phillips #1 screws on the right and left sides of the battery. Unscrew two 6.2 mm Phillips #1 screws on the right and left sides of the battery. Unscrew two 6.2 mm Phillips #1 screws on the right and left sides of the battery.
    • Unscrew two 6.2 mm Phillips #1 screws on the right and left sides of the battery.

  6. Este paso está sin traducir. Ayuda a traducirlo

    Carefully remove the battery by lifting it out of the casing.
    • Carefully remove the battery by lifting it out of the casing.

Linea de Meta

6 personas más completaron esta guía.

Equipo

USF Tampa, Team 16-1, Blackwell Winter 2016 Miembro de USF Tampa, Team 16-1, Blackwell Winter 2016

USFT-BLACKWELL-W16S16G1

4 Miembros

11 Guías creadas

Excellent instructions, very precise and easy to follow. Great job!!!!

[deleted] - Contestar

Can I remove the battery and use only the ac adapter to power it? Will it work and not cause damage to the unit?

json_viray - Contestar

when you take the battery out it works ok and when you put the battery the orange light when take out the battery its fine could it be the battery or board connector

steve varney - Contestar

when battery is out it works fine when connect out and orange and blue light come on then no display remove battery every returns to normal

steve varney - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 13

Ultimos 30 días: 58

Todo El Tiempo: 9,442