Repara tus cosas Comunidad Tienda

Acer Aspire 5734z-4836 Keyboard Replacement

Introducción

The keyboard replacement is a simple replacement guide, but to remove the panel some force may be necessary.

  1. Acer Aspire 5734z-4836 Keyboard Replacement, Battery: paso 1, imagen 1 de 1

    • Before removing the battery, power off your laptop and disconnect the AC adapter.

    • Flip your laptop on its back so the battery is facing up and the hinges are facing away from you.

    Editar

  2. Acer Aspire 5734z-4836 Keyboard Replacement: paso 2, imagen 1 de 1

    • Slide the right latch down to unlock the battery.

    Editar

  4. Acer Aspire 5734z-4836 Keyboard Replacement: paso 3, imagen 1 de 2 Acer Aspire 5734z-4836 Keyboard Replacement: paso 3, imagen 2 de 2

    • Slide and hold the left latch below the battery.

    • While holding this latch in place, pry the battery up from its bottom edge.

    • Lift the old battery out of its compartment.

    Editar

  5. Acer Aspire 5734z-4836 Keyboard Replacement, Keyboard: paso 4, imagen 1 de 3 Acer Aspire 5734z-4836 Keyboard Replacement, Keyboard: paso 4, imagen 2 de 3 Acer Aspire 5734z-4836 Keyboard Replacement, Keyboard: paso 4, imagen 3 de 3

    • Pinch the edges of the plastic covering above the keyboard, and pull away from the laptop until the covering pops off.

    • By using a bit of force some clicks will be heard when removing the cover.

    Editar

  6. Acer Aspire 5734z-4836 Keyboard Replacement: paso 5, imagen 1 de 2 Acer Aspire 5734z-4836 Keyboard Replacement: paso 5, imagen 2 de 2

    • Pull the keyboard off gently so not to damage the keyboard ribbon cable.

    • Multiple clicks may be heard as you pull the keyboard off.

    Editar

  7. Acer Aspire 5734z-4836 Keyboard Replacement: paso 6, imagen 1 de 3 Acer Aspire 5734z-4836 Keyboard Replacement: paso 6, imagen 2 de 3 Acer Aspire 5734z-4836 Keyboard Replacement: paso 6, imagen 3 de 3

    • Using a spudger or your finger, unlock the ZIF connector holding the keyboard ribbon in place by lifting the black locking lever.

    • Pull the blue keyboard ribbon cable from the ZIF connector.

    • When reinstalling a new keyboard, insert the ribbon in the same way the old keyboard's ribbon was removed.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Autor

con 5 otros colaboradores

Holly Steininger

Miembro Desde 09/12/16

252 Reputación

2 Guías creadas

Insignias: 10

+ 7 más insignias

Equipo

CSU Fullerton, Team 2-3, Bruce Fall 2016 Miembro de CSU Fullerton, Team 2-3, Bruce Fall 2016

CSUF-BRUCE-F16S2G3

4 Miembros

6 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 4

Ultimos 30 días: 11

Todo El Tiempo: 1,431