Saltar al contenido principal

Esta versión puede contener ediciones incorrectas. Cambiar a la última instantánea verificada.

Qué necesitas

  1. Este paso está sin traducir. Ayuda a traducirlo

    : paso 1, imagen 1 de 2 : paso 1, imagen 2 de 2
    • Use the blue spudger to remove the 4 rubber supports from each corner of the screen.

    • After use a PH0 screw bit to remove the corresponding screws underneath.

  2. Este paso está sin traducir. Ayuda a traducirlo

    : paso 2, imagen 1 de 1
    • Use a plastic opening tool to carefully release the plastic clips that hold the plastic frame to the back cover.

    • Be careful while handling the bottom, there are cable connections and you don't want to damage them.

  3. Este paso está sin traducir. Ayuda a traducirlo

    : paso 3, imagen 1 de 2 : paso 3, imagen 2 de 2
    • Gently disconnect the camera cable.

  4. Este paso está sin traducir. Ayuda a traducirlo

    : paso 4, imagen 1 de 1
    • Remove the 4 screws in the corners underneath the plastic frame that was removed. Screen should then be able to come of the frame.

  5. Este paso está sin traducir. Ayuda a traducirlo

    : paso 5, imagen 1 de 1
    • Take the screen lay it face down on top of the keyboard.

    • Unplug the cable that is connected to the video card.

    • This cable may be taped down to the back of the screen, if necessary lift the tape gently.

  6. Este paso está sin traducir. Ayuda a traducirlo

    : paso 6, imagen 1 de 1
    • Remove the tape, and unplug the display cable on the back of the screen.

    • Pull the tape off of the cable from the back of the screen, and now the screen should be free to come off. You are now ready to install a new one.

Linea de Meta

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 7

Todo El Tiempo: 237