Saltar al contenido principal

Acer AL1916 Stand Replacement

Qué necesitas

  1. Acer AL1916 Stand Replacement, Stand: paso 1, imagen 1 de 1
    • Lay the monitor on a flat surface so that the back is facing up.

  2. Acer AL1916 Stand Replacement: paso 2, imagen 1 de 2 Acer AL1916 Stand Replacement: paso 2, imagen 2 de 2
    • Grab the hinge cover with both hands on either side of the stand.

    • Squeeze inwards with your thumbs and fingers and lift up to remove the hinge cover.

  3. Acer AL1916 Stand Replacement: paso 3, imagen 1 de 2 Acer AL1916 Stand Replacement: paso 3, imagen 2 de 2
    • Remove the four 12.1 mm Phillips #2 screws that hold the stand to the monitor.

    • Support the monitor while removing the screws to prevent the monitor from falling.

    • Lift up to detach the stand.

    I can't get a grip to squeeze and lift the hinge cover. My fingers just slide right off.

    az_irocdriver - Contestar

Conclusión

To reassemble your device, follow these instructions in reverse order.

7 personas más completaron esta guía.

Keith

Miembro Desde 10/06/11

336 Reputación

4 Guías creadas

Equipo

Cal Poly, Team 20-26, Maness Fall 2011 Miembro de Cal Poly, Team 20-26, Maness Fall 2011

CPSU-MANESS-F11S20G26

4 Miembros

14 Guías creadas

Un comentario

Worked great…never would have guessed how to do it. Thanks.

GREG HILL - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 15

Ultimos 30 días: 38

Todo El Tiempo: 20,136