Repara tus cosas

Derecho a reparar

Tienda

Accessing Nokia 3100b Vibrating Unit

Escrito Por: Sterling Fuentes (y 2 de otros participantes)
  • Comentarios: 0
  • Favoritos: 0

Dificultad

Moderado

Pasos

10

Tiempo Requerido

10 minutos

Secciones

3

Banderas

2

Action Shots

Fotos de acción

Sé un héroe de acción! Esta guía necesita imágenes que demuestren mejor cómo llevar a cabo acciones específicas.

Missed a Step

Falta un paso

Uy! Esta guía actualmente le faltan algunos pasos importantes.

Introducción

The Nokia 3100b may not vibrate anymore when the phone is set in Vibrate mode. This guide will show you how to access the vibrating unit.

Herramientas

Comprar estas herramientas

Partes

No se especificaron partes.

  1. Make sure your phone is turned off.

    • Make sure your phone is turned off.

    Editar

  2. Press the button on the back of the phone and slide the back panel off.

    • Press the button on the back of the phone and slide the back panel off.

    • Remove the battery by pulling it from the phone.

    Editar

  3. Gently pull back the small metal frame holding the SIM card into place, and lift open the frame.

    • Gently pull back the small metal frame holding the SIM card into place, and lift open the frame.

    Editar

  4. Retrieve your SIM card.

    • Retrieve your SIM card.

    Editar

  6. Separate the front cover from the base of the phone.

    • Separate the front cover from the base of the phone.

    • Set the front cover, as indicated, aside.

    Editar

  7. Remove the screws indicated using a T6 Torx screwdriver.

    • Remove the screws indicated using a T6 Torx screwdriver.

    • Remove them in the order of the colors of the rainbow. (Red, Orange, Yellow, Green, Blue, Purple).

    Editar

  8. Separate the screen assembly from the base of the phone.

    • Separate the screen assembly from the base of the phone.

    • Set the screen assembly, as indicated, aside.

    Editar

  9. The vibrating unit can now be accessed. Note its location in the phone.

    • The vibrating unit can now be accessed. Note its location in the phone.

    Editar

  10. The vibrating unit is held in place by friction. Access the bottom of the unit and push upward to release it from the base.

    • The vibrating unit is held in place by friction. Access the bottom of the unit and push upward to release it from the base.

    Editar

  11. The vibrating unit is now removed.

    • The vibrating unit is now removed.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 2 otros colaboradores

Sterling Fuentes

Miembro Desde 09/04/10

82 Reputación

8 Guías creadas

Insignias: 8

+ 5 más insignias

Equipo

Cal Poly, Team 29-64, Johann Spring 2010 Miembro de Cal Poly, Team 29-64, Johann Spring 2010

CPSU-JOHANN-S10S29G64

3 Miembros

8 Guías creadas

0 comentarios

Agregar un comentario

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 1,536