Introducción

The DC input of the Nokia 3100b is where the cell phone's charger plugs in to. This guide shows you how to access the input.

Partes

No se requieren partes.

Make sure your phone is turned off.
  • Make sure your phone is turned off.

Agregar Comentario

Press the button on the back of the phone and slide the back panel off.
  • Press the button on the back of the phone and slide the back panel off.

  • Remove the battery by pulling it from the phone.

Agregar Comentario

  • Note the small metal frame that hold the SIM card into place.

  • Gently pull back the tab and lift open the frame.

Agregar Comentario

  • Retrieve your SIM card.

Agregar Comentario

  • Separate the front cover from the base.

Agregar Comentario

  • Using a T6 Torx screwdriver, remove the screws in the order of the colors of the rainbow.

Agregar Comentario

  • Separate the screen assembly from the base.

Agregar Comentario

  • Note where the DC input is.

Agregar Comentario

  • Use a pair of tweezers to remove the DC input from the base.

Agregar Comentario

  • The DC input is now removed. Replace as necessary.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Equipo

Cal Poly, Team 29-64, Johann Spring 2010 Miembro de Cal Poly, Team 29-64, Johann Spring 2010

CPSU-JOHANN-S10S29G64

3 Miembros

8 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 2

Últimos 30 Días: 2

Todo El Tiempo: 936