Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Introducción

Replace the LAN Card.

Partes

No se especificaron partes.

  1. Identify the battery locker.
    • Identify the battery locker.

    • Set the righthand locker to unlock.

    • Pull the battery while setting the lefthand locker to unlock.

  2. Remove the battery.
    • Remove the battery.

  3. Remove the following screw: 1 long Philips #0 screw
    • Remove the following screw:

    • 1 long Philips #0 screw

    • Remove the cover.

  4. Remove the coaxial connectors by prying the connectors straight up from the board. Remove the following screw: 1 short Philips #0 screw
    • Remove the coaxial connectors by prying the connectors straight up from the board.

    • Remove the following screw:

    • 1 short Philips #0 screw

    • Remove the LAN Card.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Cakra Diaz

Miembro Desde 26/07/17

949 Reputación

6 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 2

Todo El Tiempo: 195