Saltar al contenido principal

AXIOO Pico M1110 PJM Keyboard Replacement

Qué necesitas

  1. AXIOO Pico M1110 PJM Keyboard Replacement, Underside: paso 1, imagen 1 de 1
    • Identify the battery locker.

    • Set the righthand locker to unlock.

    • Pull the battery while setting the lefthand locker to unlock.

  2. AXIOO Pico M1110 PJM Keyboard Replacement: paso 2, imagen 1 de 1
    • Remove the battery.

  3. AXIOO Pico M1110 PJM Keyboard Replacement, Keyboard: paso 3, imagen 1 de 3 AXIOO Pico M1110 PJM Keyboard Replacement, Keyboard: paso 3, imagen 2 de 3 AXIOO Pico M1110 PJM Keyboard Replacement, Keyboard: paso 3, imagen 3 de 3
    Herramienta utilizada en este paso:
    Flathead 3/32" or 2.5 mm Screwdriver
    $5.49
    Comprar
    • Identify these:

    • 4 keyboard clipper

    • Remove the keyboard clipper by gently twisting them till pops out.

    • Use a small flathead screwdriver to twist easier.

    • Lift the keyboard up by pivoting on the bottom side.

    • Don't lift it too high up, because beneath it there's the keyboard ZIF connector still connected; refer to the next step.

  4. AXIOO Pico M1110 PJM Keyboard Replacement: paso 4, imagen 1 de 3 AXIOO Pico M1110 PJM Keyboard Replacement: paso 4, imagen 2 de 3 AXIOO Pico M1110 PJM Keyboard Replacement: paso 4, imagen 3 de 3
    Herramienta utilizada en este paso:
    Tweezers
    $4.99
    Comprar
    • Identify this:

    • The ZIF connector locker

    • Gently pull the locker out.

    • Use a pair of tweezers to make it easier to pull it out.

    • Don't forget the other side too!

    • Remove the ZIF connector.

    • Remove the keyboard.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Cakra Diaz

Miembro Desde 07/26/17

999 Reputación

6 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 1

Ultimos 30 días: 1

Todo El Tiempo: 559