Repara tus cosas Comunidad Tienda

ASUSTeK B360-KYLIN Graphics Card Replacement

Introducción

Use this guide to install a new Graphics card into your personal computer.

In this Guide we successfully installed an Nvidia GeForce GTX 1660 SUPER on a ASUSTeK B360-KYLIN Motherboard using only a crosshead screwdriver.

Be careful to set up your system in a static free environment so as to mitigate the likelihood of being electrocuted.

Before using this guide make sure you have deleted all old driver files on your system so as to prepare your system for a fresh driver install.

Qué necesitas

  1. ASUSTeK B360-KYLIN Graphics Card Replacement, Graphics Card: paso 1, imagen 1 de 1

    • Remove the two screws holding the cover to the rest of the computer case.

    Editar

  2. ASUSTeK B360-KYLIN Graphics Card Replacement: paso 2, imagen 1 de 1

    • Remove the cover case from your computer.

    Editar

  4. ASUSTeK B360-KYLIN Graphics Card Replacement: paso 3, imagen 1 de 2 ASUSTeK B360-KYLIN Graphics Card Replacement: paso 3, imagen 2 de 2

    • Unplug the power cable on the graphics card.

    Editar

  5. ASUSTeK B360-KYLIN Graphics Card Replacement: paso 4, imagen 1 de 2 ASUSTeK B360-KYLIN Graphics Card Replacement: paso 4, imagen 2 de 2

    • Using a Phillips #1 screwdriver, remove the screw holding the graphics card to the case.

    Editar

  6. ASUSTeK B360-KYLIN Graphics Card Replacement: paso 5, imagen 1 de 2 ASUSTeK B360-KYLIN Graphics Card Replacement: paso 5, imagen 2 de 2

    • Gently remove the graphics card out of the device.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

6 personas más completaron esta guía.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 20

Ultimos 30 días: 75

Todo El Tiempo: 1,989