Repara tus cosas Comunidad Tienda

ASUS ZenWatch Charging Cradle Circuit board Replacement

Introducción

Replacing the circuit in the charging cradle

Qué necesitas

  1. ASUS ZenWatch Charging Cradle Circuit board Replacement, Charging Cradle Circuit board: paso 1, imagen 1 de 3 ASUS ZenWatch Charging Cradle Circuit board Replacement, Charging Cradle Circuit board: paso 1, imagen 2 de 3 ASUS ZenWatch Charging Cradle Circuit board Replacement, Charging Cradle Circuit board: paso 1, imagen 3 de 3

    • Using a metal spudger gently pry the plastic outer case apart

    • Pry open a little bit on each side before trying to open fully

    Editar

  3. ASUS ZenWatch Charging Cradle Circuit board Replacement: paso 2, imagen 1 de 3 ASUS ZenWatch Charging Cradle Circuit board Replacement: paso 2, imagen 2 de 3 ASUS ZenWatch Charging Cradle Circuit board Replacement: paso 2, imagen 3 de 3

    • Use the PH0 sized Phillips screwdriver to remove the three screws (2mm) holding the board to the cradle.

    • Gently pry up with your hands to pull the board off.

    • Don't grab directly on the USB port as you may loosen or bust the connections.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 2 otros colaboradores

Wayne McClure

Miembro Desde 02/10/16

961 Reputación

5 Guías creadas

Insignias: 14

+ 11 más insignias

Equipo

USF Tampa, Team 1-3, Sullivan Spring 2016 Miembro de USF Tampa, Team 1-3, Sullivan Spring 2016

USFT-SULLIVAN-S16S1G3

4 Miembros

7 Guías creadas

Un comentario

If you had listed what components were on the board or at least taken a picture of the other side of the board, I might have given you some points.

Nate Fansler - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 3

Todo El Tiempo: 2,832