Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Partes y herramientas

Introducción

If your battery is not holding a charge, you can use this guide to replace it. Before beginning to replace the battery in this device, there are a few precautions to consider. One of those precautions would be to ground yourself to prevent frying the internal components. Another precaution would be to label and organize your small parts and screws to avoid misplacing important components. Happy fixing!

Partes

No se especificaron partes.

  1. if present, remove the MicroSD card before disassembly. Failure to remove could lead to damage to the MicroSD card , rear cover, or MicroSD card slot. Use the plastic tool to pry between the silver bezel and the back case Work the tool around the device to free the back case
    • if present, remove the MicroSD card before disassembly. Failure to remove could lead to damage to the MicroSD card , rear cover, or MicroSD card slot.

    • Use the plastic tool to pry between the silver bezel and the back case

    • Work the tool around the device to free the back case

  2. Remove the ribbon cables by lifting up the white retaining flap on the ZIF connectors, then pulling the ribbon cable away. Do not kink the ribbon cables as they can break easily
    • Remove the ribbon cables by lifting up the white retaining flap on the ZIF connectors, then pulling the ribbon cable away.

    • Do not kink the ribbon cables as they can break easily

  3. Kits de Reparación de Pantalla LCD de iPhone

    La opción de presupuesto, cubierta por nuestra garantía de por vida.

    Compra kits

    Kits de Reparación de Pantalla LCD de iPhone

    Reduce los costos de reparación, no la calidad.

    Compra kits
  4. Remove the battery connector by prying it up away from the device using 2 plastic pry tools Remove the battery connector by prying it up away from the device using 2 plastic pry tools Remove the battery connector by prying it up away from the device using 2 plastic pry tools
    • Remove the battery connector by prying it up away from the device using 2 plastic pry tools

  5. Remove all 9 of the 1.5mm #00 Philips screws Gently lift the battery out of the device
    • Remove all 9 of the 1.5mm #00 Philips screws

    • Gently lift the battery out of the device

    • Use an opening pick or similar tool to separate the adhesive on the bottom and top of the battery.

Conclusión

To reassemble your device, follow these instructions in reverse order. Ensure that the MicroSD card slot cover is in its closed position before re-attaching the rear cover.

23 personas más completaron esta guía.

Equipo

USF Tampa, Team 2-2, Cagle Fall 2016 Miembro de USF Tampa, Team 2-2, Cagle Fall 2016

USFT-CAGLE-F16S2G2

4 Miembros

5 Guías creadas

Thanks for this tutorial. Any chance anybody knows the part number for the battery and a good source?

danpobrien - Contestar

Yes, A good tutorial but part number for the battery would be useful

celdor - Contestar

Doh! its in the pictures its a C11Pn9H should have spotted that.

celdor -

The original battery says” Rating 3.8v 15.2 Wh” and “Capacity 4000mAh(TYP) 3984mAh(MIN)”

Clone batteries may be lower. Wish I’d bought a “factory battery”

license -

Tutorial was perfect, much easier than I thought. Unfortunately swapping the battery did not fix my tablet, but I feel a lot more confident now to try fixing things like this first instead of just automatically throwing them away. Thanks!

cdclemons - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 10

Ultimos 7 días: 78

Ultimos 30 días: 267

Todo El Tiempo: 17,485