Saltar al contenido principal

ASUS X552LAV-BBI5N08 Hard Drive Replacement

Qué necesitas

  1. ASUS X552LAV-BBI5N08 Hard Drive Replacement, Battery: paso 1, imagen 1 de 1
    • Battery is not showed in pictures.

    • Flip the laptop face down.

  2. ASUS X552LAV-BBI5N08 Hard Drive Replacement: paso 2, imagen 1 de 3 ASUS X552LAV-BBI5N08 Hard Drive Replacement: paso 2, imagen 2 de 3 ASUS X552LAV-BBI5N08 Hard Drive Replacement: paso 2, imagen 3 de 3
    • Slide the right button to the left.

    • Hold the left button to the right.

    • While you hold the left button in position, slide the battery out by pushing it away from you.

  3. ASUS X552LAV-BBI5N08 Hard Drive Replacement, Hard Drive: paso 3, imagen 1 de 1
    • Start by flipping the laptop face down.

    • Locate the bottom panel. It is at the opposite end of the battery.

    • Remove the two 12mm screws at the bottom panel with a Tri-wing Y1 screwdriver.

  4. ASUS X552LAV-BBI5N08 Hard Drive Replacement: paso 4, imagen 1 de 3 ASUS X552LAV-BBI5N08 Hard Drive Replacement: paso 4, imagen 2 de 3 ASUS X552LAV-BBI5N08 Hard Drive Replacement: paso 4, imagen 3 de 3
    • Remove bottom panel by lifting it up.

    • Locate the hard drive.

    • It is located in the bottom left corner.

  5. ASUS X552LAV-BBI5N08 Hard Drive Replacement: paso 5, imagen 1 de 3 ASUS X552LAV-BBI5N08 Hard Drive Replacement: paso 5, imagen 2 de 3 ASUS X552LAV-BBI5N08 Hard Drive Replacement: paso 5, imagen 3 de 3
    • Remove the four 5.5mm screws located on the hard drive case using a Tri-wing Y1 screwdriver.

    • Slide the hard drive out to the left.

  6. ASUS X552LAV-BBI5N08 Hard Drive Replacement: paso 6, imagen 1 de 2 ASUS X552LAV-BBI5N08 Hard Drive Replacement: paso 6, imagen 2 de 2
    • Lift the hard drive out.

    • Once the hard drive is removed, place the hard drive at a different area.

  7. ASUS X552LAV-BBI5N08 Hard Drive Replacement: paso 7, imagen 1 de 3 ASUS X552LAV-BBI5N08 Hard Drive Replacement: paso 7, imagen 2 de 3 ASUS X552LAV-BBI5N08 Hard Drive Replacement: paso 7, imagen 3 de 3
    • Place the hard drive on its side.

    • Remove the four 5mm screws from the sides of the case by using a Tri-wing Y1 screwdriver.

    • Lift the hard drive out of the case.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Jason Vo

Miembro Desde 02/15/18

857 Reputación

5 Guías creadas

Equipo

USF Tampa, Team S17-G1, Boczar Spring 2018 Miembro de USF Tampa, Team S17-G1, Boczar Spring 2018

USFT-BOCZAR-S18S17G1

4 Miembros

5 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 3

Todo El Tiempo: 311