Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
Herramienta utilizada en este paso:Metal Spudger$2.99-
Using a Spudger, gently pry up the keyboard.
-
-
Este paso está sin traducir. Ayuda a traducirlo
Herramienta utilizada en este paso:Nylon Tipped Tweezers$4.99-
Rotate the keyboard to face downward.
-
Pull out the blue wiring connection. Use tweezers to make it easier to remove.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use the Phillips #0 screwdriver to remove the two screws on the back of the laptop.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove all screws located on the bottom plate of the laptop, beginning with the three located underneath the disc drive.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Rotate the laptop until it is sitting face up and extract all screws exposed by removing the keyboard.
-
-
Este paso está sin traducir. Ayuda a traducirlo
Herramienta utilizada en este paso:Metal Spudger$2.99-
Pull up on the front panel using the spudger until the front panel separates from the bottom panel.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Unscrew the six screws using the Phillips #0 Screwdriver.
-
Un comentario
First step is wrong; attempting to prise out the keyboard will damage it. First step should be to remove the screws which hold in the keyboard.