Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

  1. Este paso está sin traducir. Ayuda a traducirlo

    Unscrew the (10) screws on the bottom of the computer chassis using the JIS #0 screwdriver.
    • Unscrew the (10) screws on the bottom of the computer chassis using the JIS #0 screwdriver.

  2. Este paso está sin traducir. Ayuda a traducirlo

    Slightly lift the lower case and push it toward the rear of the computer to free the mounting tabs. Slightly lift the lower case and push it toward the rear of the computer to free the mounting tabs.
    • Slightly lift the lower case and push it toward the rear of the computer to free the mounting tabs.

  3. Este paso está sin traducir. Ayuda a traducirlo

    Remove the (6) six screws attaching the battery to the frame using the JIS #0 screwdriver. Use the black plastic spudger to remove the battery from the device. Use the black plastic spudger to remove the battery from the device.
    • Remove the (6) six screws attaching the battery to the frame using the JIS #0 screwdriver.

    • Use the black plastic spudger to remove the battery from the device.

  4. SALTEA LA ACTUALIZACIÓN

    Ahorra reparando con un kit todo en uno.

    Compra Kits de Reparación

    SALTEA LA ACTUALIZACIÓN

    Ahorra reparando con un kit todo en uno.

    Compra Kits de Reparación
  5. Este paso está sin traducir. Ayuda a traducirlo

    Gently take the battery out of the laptop, making sure that all wires connecting to it are disconnected. Gently take the battery out of the laptop, making sure that all wires connecting to it are disconnected. Gently take the battery out of the laptop, making sure that all wires connecting to it are disconnected.
    • Gently take the battery out of the laptop, making sure that all wires connecting to it are disconnected.

  6. Este paso está sin traducir. Ayuda a traducirlo

    Gently pry this metal cover off the motherboard. Gently pry this metal cover off the motherboard.
    • Gently pry this metal cover off the motherboard.

  7. Este paso está sin traducir. Ayuda a traducirlo

    Now the RAM stick is exposed. Using two fingers, gently push the buttons to release the RAM stick Now the RAM stick is exposed. Using two fingers, gently push the buttons to release the RAM stick Now the RAM stick is exposed. Using two fingers, gently push the buttons to release the RAM stick
    • Now the RAM stick is exposed. Using two fingers, gently push the buttons to release the RAM stick

  8. Este paso está sin traducir. Ayuda a traducirlo

    When you put in the new RAM, make sure to line up the connectors. Put the RAM in gently, as being rough with it can cause damage to the stick.
    • When you put in the new RAM, make sure to line up the connectors. Put the RAM in gently, as being rough with it can cause damage to the stick.

Linea de Meta

Equipo

USF Tampa, Team S5-G1, Walkup Fall 2017 Miembro de USF Tampa, Team S5-G1, Walkup Fall 2017

USFT-WALKUP-F17S5G1

4 Miembros

6 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 5

Ultimos 30 días: 16

Todo El Tiempo: 687