Saltar al contenido principal

ASUS VivoBook S400C Heat Shield Prerequisite

Sólo Prerrequisito
Esta guía solo debería usarse como prerrequisito para otras guías. Por tanto, estará incompleta.

Qué necesitas

  1. ASUS VivoBook S400C Heat Shield Prerequisite, Remove the Bottom Cover: paso 1, imagen 1 de 1
    • Flip the device over and remove the ten 5.7 mm screws with a Phillips #0 screwdriver.

  2. ASUS VivoBook S400C Heat Shield Prerequisite: paso 2, imagen 1 de 2 ASUS VivoBook S400C Heat Shield Prerequisite: paso 2, imagen 2 de 2
    • Use a spudger or your fingers to go around and lift the edges and release the back panel.

  3. ASUS VivoBook S400C Heat Shield Prerequisite, Disconnect the Battery: paso 3, imagen 1 de 1
    • Using a spudger, lift up the plug connecting the battery to the motherboard.

  4. ASUS VivoBook S400C Heat Shield Prerequisite, Heat Shield: paso 4, imagen 1 de 2 ASUS VivoBook S400C Heat Shield Prerequisite, Heat Shield: paso 4, imagen 2 de 2
    • Remove the black shield covering the display connector and the heat sink.

    • You may need to use double-sided adhesive tape to resecure the shield.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Jerry Wheeler

Miembro Desde 03/21/22

72,268 Reputación

71 Guías creadas

Equipo

Oregonians Miembro de Oregonians

Community

Miembros de 8

189 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 2

Ultimos 30 días: 2

Todo El Tiempo: 16