Introducción

This circuit board is directly connected to the USB receivers and is responsible for reading information from USB drives as well as writing information on to USB drives. This board also contains the buttons for power and volume control.

  1. Remove the ten 10.7 mm screws using a Phillips #0 screwdriver from the back of the laptop. Remove the ten 10.7 mm screws using a Phillips #0 screwdriver from the back of the laptop.
    • Remove the ten 10.7 mm screws using a Phillips #0 screwdriver from the back of the laptop.

  2. Using a heavy-duty spudger,  pry the back cover up from the frame and completely remove. Using a heavy-duty spudger,  pry the back cover up from the frame and completely remove.
    • Using a heavy-duty spudger, pry the back cover up from the frame and completely remove.

  3. ¡Envío gratuito para todos los pedidos de más de USD100 o que contengan un Pro Tech Toolkit!

    Visita Nuestra Tienda
  4. Remove the two 4.7 mm screws with the Phillips #0 screwdriver. Remove the two 4.7 mm screws with the Phillips #0 screwdriver.
    • Remove the two 4.7 mm screws with the Phillips #0 screwdriver.

  5. Using a spudger or fingernail, flip up the white plastic latch securing the ribbon cable. After the latch is released remove the ribbon cable and clear it from the board. After the latch is released remove the ribbon cable and clear it from the board.
    • Using a spudger or fingernail, flip up the white plastic latch securing the ribbon cable.

    • After the latch is released remove the ribbon cable and clear it from the board.

  6. Remove the board itself by carefully pulling the board up then away from the rest of the computer. Remove the board itself by carefully pulling the board up then away from the rest of the computer.
    • Remove the board itself by carefully pulling the board up then away from the rest of the computer.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Wyatt Scott

Miembro Desde 01/11/18

121 Reputación

1 Guía escrita

Equipo

IUPUI, Team S2-G3, Harley Fall 2018 Miembro de IUPUI, Team S2-G3, Harley Fall 2018

IUPUI-HARLEY-F18S2G3

3 Miembros

2 Guías creadas

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 2

Últimos 30 Días: 16

Todo El Tiempo: 97