Saltar al contenido principal

ASUS ROG Strix GL503VD-DB71 M.2 SSD Replacement

Qué necesitas

  1. ASUS ROG Strix GL503VD-DB71 M.2 SSD Replacement, M.2 Solid State Drive: paso 1, imagen 1 de 2 ASUS ROG Strix GL503VD-DB71 M.2 SSD Replacement, M.2 Solid State Drive: paso 1, imagen 2 de 2
    • Completely turn off the laptop, lay it on a flat surface, and turn it over.

  2. ASUS ROG Strix GL503VD-DB71 M.2 SSD Replacement: paso 2, imagen 1 de 2 ASUS ROG Strix GL503VD-DB71 M.2 SSD Replacement: paso 2, imagen 2 de 2
    • Using a plastic pry tool, pry off the rubber tab to reveal the screw underneath.

  3. ASUS ROG Strix GL503VD-DB71 M.2 SSD Replacement: paso 3, imagen 1 de 2 ASUS ROG Strix GL503VD-DB71 M.2 SSD Replacement: paso 3, imagen 2 de 2
    • Using a Phillips #0 screwdriver, unscrew the one 2 mm screw that is holding down the compartment cover on the bottom of the laptop.

  4. ASUS ROG Strix GL503VD-DB71 M.2 SSD Replacement: paso 4, imagen 1 de 3 ASUS ROG Strix GL503VD-DB71 M.2 SSD Replacement: paso 4, imagen 2 de 3 ASUS ROG Strix GL503VD-DB71 M.2 SSD Replacement: paso 4, imagen 3 de 3
    • With a plastic pry tool, carefully pry open the cover on the bottom of the laptop starting where the screw was located.

    • Once part of the cover is popped off, slide your pry tool around the edge of the entire cover until all the connectors unsnap.

  5. ASUS ROG Strix GL503VD-DB71 M.2 SSD Replacement: paso 5, imagen 1 de 2 ASUS ROG Strix GL503VD-DB71 M.2 SSD Replacement: paso 5, imagen 2 de 2
    • Locate the M.2 SSD and with a Phillips #0 screwdriver unscrew the 2.5 mm screw holding it down.

  6. ASUS ROG Strix GL503VD-DB71 M.2 SSD Replacement: paso 6, imagen 1 de 2 ASUS ROG Strix GL503VD-DB71 M.2 SSD Replacement: paso 6, imagen 2 de 2
    • With your hand, lift up the M.2 SSD and carefully pull it out of the connector slot making sure not to apply to much pressure.

  7. ASUS ROG Strix GL503VD-DB71 M.2 SSD Replacement: paso 7, imagen 1 de 1
    • Take your new M.2 SSD and slide it back into the connector slot face up until it is fully in.

    • Some connection pads on M.2 SSDs are very fragile and can be broken easily.

  8. ASUS ROG Strix GL503VD-DB71 M.2 SSD Replacement: paso 8, imagen 1 de 2 ASUS ROG Strix GL503VD-DB71 M.2 SSD Replacement: paso 8, imagen 2 de 2
    • Take the 2.5 mm screw that was holding down the M.2 SSD and with a Phillips #0 screwdriver screw it back into the slot to hold down the new M.2 SSD.

  9. ASUS ROG Strix GL503VD-DB71 M.2 SSD Replacement: paso 9, imagen 1 de 1
    • Take the bottom panel and align it so the shape fits to the opening.

    • Slide the left side of the cover back into the slot first so that the two extrusions fit into their openings.

  10. ASUS ROG Strix GL503VD-DB71 M.2 SSD Replacement: paso 10, imagen 1 de 2 ASUS ROG Strix GL503VD-DB71 M.2 SSD Replacement: paso 10, imagen 2 de 2
    • Carefully press down around all the sides of the bottom cover until all the connectors snap back into place.

  11. ASUS ROG Strix GL503VD-DB71 M.2 SSD Replacement: paso 11, imagen 1 de 2 ASUS ROG Strix GL503VD-DB71 M.2 SSD Replacement: paso 11, imagen 2 de 2
    • Using a Phillips #0 screwdriver, take the 2 mm screw that was holding down the cover and screw it back into the opening on the cover.

  12. ASUS ROG Strix GL503VD-DB71 M.2 SSD Replacement: paso 12, imagen 1 de 1
    • Place the rubber tab back into its slot with the sticky side down.

Linea de Meta

Una persona más ha completado esta guía.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 14

Ultimos 30 días: 75

Todo El Tiempo: 6,504