Saltar al contenido principal

Introducción

If you want to upgrade storage space, this guide will show you how to replace the hard drive. Be sure the hard drive length is 2.5" and width is 9.5 mm. Also the connection of the hard drive must be SATA3.

Partes

No se especificaron partes.

  1. Push the battery latch. Push the battery latch.
    • Push the battery latch.

  2. Keep the battery latch held while you remove the battery.
    • Keep the battery latch held while you remove the battery.

  3. Kits de Reparación de Batería de iPhone

    Sólo $29.99

    Buy Now

    Kits de Reparación de Batería de iPhone

    Sólo $29.99

    Buy Now
  4. Remove the one screw securing the back cover. Pry off the cover using a finger. This device was missing its screws on the back cover when we received the device. As a result, we do not know what head type the screws are, along with their lengths.
    • Remove the one screw securing the back cover.

    • Pry off the cover using a finger.

    • This device was missing its screws on the back cover when we received the device. As a result, we do not know what head type the screws are, along with their lengths.

  5. Remove the screws securing hard drive to the laptop.
    • Remove the screws securing hard drive to the laptop.

    • Pull out the hard drive from the connector.

    • Replace with a new hard drive.

    • This device was missing its screws on the back cover when we received the device. As a result, we do not know what head type the screws are, along with their lengths.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Ruben Lopez

Miembro Desde 05/11/18

399 Reputación

4 Guías creadas

Equipo

IUPUI, Team S1-G4, Baechle Fall 2018 Miembro de IUPUI, Team S1-G4, Baechle Fall 2018

IUPUI-BAECHLE-F18S1G4

3 Miembros

4 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 7

Últimos 30 Días: 10

Todo El Tiempo: 92