Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Turn the laptop off and unplug all cables.
-
Flip over so the bottom is facing you.
-
Remove the ten 3mm Torx T5 screws from the bottom cover.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use a spudger to wedge between the laptop and bottom cover—lift upwards to pry open.
-
Run the spudger along the perimeter of the bottom cover to remove.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the three 4mm JIS #0 screws from the battery.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Using both hands, lift the battery vertically out of the device.
-
Cancelar: No complete esta guía.
4 personas más completaron esta guía.