Saltar al contenido principal

Introducción

This guide will demonstrate how to remove and replace the optical drive, should it ever malfunction, break, or jam.

Partes

No se especificaron partes.

  1. Begin by putting the needle into the hole in the disk tray.
    • Begin by putting the needle into the hole in the disk tray.

    I want to point out that in order to do this step you have to remove the screw holding the CD drive in place first. On top of this if the screw is out very light pulling on the drive will remove it. There is no need for a pry tool or a needle to eject it. To make it easier on yourself I would actually do step 5 first and just be done with all the screws before you take out the CD screw (Which, by the way, step 5 is shown with the CD drive still attached and screwed in which can cause confusion and possible damage if not careful/paying attention).

    Stephen Patterson - Contestar

  2. Use the spudger to help ease out the disk drive.
    • Use the spudger to help ease out the disk drive.

  3. Pull out disk tray entirely.
    • Pull out disk tray entirely.

    I was not able to extract the DVD drive until unscrewing the .8 screw central on the back of the laptop. That one holds the DVD drive.

    Vio Belc - Contestar

    You have to also remove the screw securing the DVD drive to the case.

    sgust - Contestar

Conclusión

To reassemble your device, follow these instructions in reverse order.

Ralph Lopez

Miembro Desde 23/10/17

202 Reputación

2 Guías creadas

Equipo

Un Comentario

Prior to step 1 , there is a screw that needs removed [Middle screw on the back on the side with the DVD player]

William Irons - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 5

Ultimos 30 días: 10

Todo El Tiempo: 967