Saltar al contenido principal

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

APS Tech 101629 Internal Drive Component Replacement

Qué necesitas

  1. APS Tech 101629 Internal Drive Component Replacement, External Casing: paso 1, imagen 1 de 3 APS Tech 101629 Internal Drive Component Replacement, External Casing: paso 1, imagen 2 de 3 APS Tech 101629 Internal Drive Component Replacement, External Casing: paso 1, imagen 3 de 3
    • Pry all four of the plastic feet off the bottom of the enclosure using the iPod opening tool.

  2. APS Tech 101629 Internal Drive Component Replacement: paso 2, imagen 1 de 2 APS Tech 101629 Internal Drive Component Replacement: paso 2, imagen 2 de 2
    • Unscrew the four screws previously covered by the feet with a Phillips #1 screwdriver.

  3. APS Tech 101629 Internal Drive Component Replacement: paso 3, imagen 1 de 2 APS Tech 101629 Internal Drive Component Replacement: paso 3, imagen 2 de 2
    • Flip the device right side up.

    • Gently slide the casing upwards and off the hard drive.

  4. APS Tech 101629 Internal Drive Component Replacement: paso 4, imagen 1 de 1
    • Flip device upside down again.

    • Gently pry the bottom gray casing away from the device.

  5. APS Tech 101629 Internal Drive Component Replacement: paso 5, imagen 1 de 2 APS Tech 101629 Internal Drive Component Replacement: paso 5, imagen 2 de 2
    • Rotate so the back of the device is facing you.

    • Gently pry the back casing away.

    • When the back casing is removed, the fan will become loose.

  6. APS Tech 101629 Internal Drive Component Replacement, Internal Drive Component: paso 6, imagen 1 de 2 APS Tech 101629 Internal Drive Component Replacement, Internal Drive Component: paso 6, imagen 2 de 2
    • Flip so device is upside down.

    • Remove 4 screws with Phillips #1 screw driver.

    • Be sure to save the washers that seperate the screws from the baseplate for reassembly.

  7. APS Tech 101629 Internal Drive Component Replacement: paso 7, imagen 1 de 2 APS Tech 101629 Internal Drive Component Replacement: paso 7, imagen 2 de 2
    • Slide the internal drive component away from the back of the device.

    • Remove the connections from the back of the internal component in the order of your choosing, we suggest left to right. The connections are:

    • Audio Connection

    • SCSI ID

    • Terminate On

    • SCSI Connection

    • DC Input (power)

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Alexis Weckel

Miembro Desde 04/11/11

140 Reputación

3 Guías creadas

Equipo

Cal Poly, Team 24-60, Amido Spring 2011 Miembro de Cal Poly, Team 24-60, Amido Spring 2011

CPSU-AMIDO-S11S24G60

5 Miembros

12 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 2

Todo El Tiempo: 1,092