Esta versión puede contener ediciones incorrectas. Cambiar a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Pry all four of the plastic feet off the bottom of the enclosure using the iPod opening tool.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Unscrew the four screws previously covered by the feet with a Phillips #1 screwdriver.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Flip the device right side up.
-
Gently slide the casing upwards and off the hard drive.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Flip device upside down again.
-
Gently pry the bottom gray casing away from the device.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Rotate so the back of the device is facing you.
-
Gently pry the back casing away.
-
When the back casing is removed, the fan will become loose.
-
Cancelar: No complete esta guía.
Una persona más ha completado esta guía.