Menú

Tus configuraciones

Mi Mesa de Trabajo

Obtén acceso rápido a guías, partes y respuestas para tus dispositivos
Mi Carrito

Al parecer tu carrito está vacío

Visita Nuestra Tienda

APS Tech 101629 External Casing Replacement

Escrito Por: Patrick Meyer (y 6 de otros participantes)
  • Comentarios: 0
  • Favoritos: 1
  • Terminaciones: 1

Dificultad

Fácil

Pasos

5

Tiempo Requerido

10 minutos

Secciones

1

Banderas

0

Introducción

This is one of the easier disassembly guides for this device. The case is easily removed, but will void any still existing warranty on the device. Removing the case is necessary to get at any internal component.

Herramientas

Comprar estas herramientas

Partes

No se especificaron partes.

  1. Pry 4 plastic feet off the bottom of the enclosure using the iPod opening tool. Pry 4 plastic feet off the bottom of the enclosure using the iPod opening tool. Pry 4 plastic feet off the bottom of the enclosure using the iPod opening tool.

    • Pry 4 plastic feet off the bottom of the enclosure using the iPod opening tool.

    Traducir

  2. Unscrew the four screws previously covered by the feet. Unscrew the four screws previously covered by the feet.

    • Unscrew the four screws previously covered by the feet.

    Traducir

  4. Flip the device right side up, then gently slide the casing upwards and off the hard drive. Flip the device right side up, then gently slide the casing upwards and off the hard drive.

    • Flip the device right side up, then gently slide the casing upwards and off the hard drive.

    Traducir

  5. Flip device upside down again.

    • Flip device upside down again.

    • Gently pry the bottom gray casing away from the device.

    Traducir

  6. Rotate so back of device is facing you, then gently pry the back casing away. When back casing is removed, the fan will become loose.

    • Rotate so back of device is facing you, then gently pry the back casing away.

    • When back casing is removed, the fan will become loose.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Autor

con 6 otros colaboradores

Patrick Meyer

Miembro Desde 10/04/11

83 Reputación

3 Guías creadas

Insignias: 11

+ 8 más insignias

Equipo

Cal Poly, Team 24-60, Amido Spring 2011 Miembro de Cal Poly, Team 24-60, Amido Spring 2011

CPSU-AMIDO-S11S24G60

5 Miembros

6 Guías creadas

0 Comentarios

Agregar un comentario

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 0

Todo El Tiempo: 528