Saltar al contenido principal

AKASO KingPad A90 Rear Speaker Replacement

Qué necesitas

  1. AKASO KingPad A90 Rear Speaker Replacement, Rear Speaker: paso 1, imagen 1 de 3 AKASO KingPad A90 Rear Speaker Replacement, Rear Speaker: paso 1, imagen 2 de 3 AKASO KingPad A90 Rear Speaker Replacement, Rear Speaker: paso 1, imagen 3 de 3
    • Remove screws.

    • Insert spudger tool on the middle of the left side, between the white and black plastic.

    • Slide in a plastic opening tool and use it to further pull the back off.

    • Work your way around the edge of the tablet with the plastic opening tool and insert more as needed.

    • Pull off the back cover.

  2. AKASO KingPad A90 Rear Speaker Replacement: paso 2, imagen 1 de 3 AKASO KingPad A90 Rear Speaker Replacement: paso 2, imagen 2 de 3 AKASO KingPad A90 Rear Speaker Replacement: paso 2, imagen 3 de 3
    • Plug in soldering iron and let it warm up for ten minutes.

    • Locate the speaker solder points and note where it is attached to the motherboard.

    • Solder the old speaker out of its mark. (Touch the tip of the solder iron to the soldering point).

  3. AKASO KingPad A90 Rear Speaker Replacement: paso 3, imagen 1 de 3 AKASO KingPad A90 Rear Speaker Replacement: paso 3, imagen 2 de 3 AKASO KingPad A90 Rear Speaker Replacement: paso 3, imagen 3 de 3
    • Solder the new speaker onto the points where the old speaker was.

  4. AKASO KingPad A90 Rear Speaker Replacement: paso 4, imagen 1 de 3 AKASO KingPad A90 Rear Speaker Replacement: paso 4, imagen 2 de 3 AKASO KingPad A90 Rear Speaker Replacement: paso 4, imagen 3 de 3
    • Replace the back cover with the new rear speaker unit in place.

    • Gently press the speaker into place.

    • Don't let the volume rocker unit fall out of place.

    • Replace the screws.

Linea de Meta

camchristo

Miembro Desde 03/24/15

71 Reputación

1 Guía escrita

Equipo

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 2

Ultimos 30 días: 3

Todo El Tiempo: 361