Saltar al contenido principal

360fly 4K Lens Replacement

Qué necesitas

  1. 360fly 4K Lens Replacement, Battery: paso 1, imagen 1 de 1
    • Flip the camera upside down and peel off the two plastic screw covers with the metal spudger to reveal the screws.

  2. 360fly 4K Lens Replacement: paso 2, imagen 1 de 1
    • Remove the two 5 mm screws from the bottom of the camera with a T4 screwdriver.

  3. 360fly 4K Lens Replacement: paso 3, imagen 1 de 2 360fly 4K Lens Replacement: paso 3, imagen 2 de 2
    • Gently pry the plastic ring from around the charging plate with the metal spudger.

    • Remove the outside shell by pressing against the center of the charging plate and pulling the bottom shell away from the top shell.

  4. 360fly 4K Lens Replacement: paso 4, imagen 1 de 1
    • Remove the five 2 mm screws using a T4 screwdriver.

    • Pull off the charging plate assembly.

  5. 360fly 4K Lens Replacement: paso 5, imagen 1 de 2 360fly 4K Lens Replacement: paso 5, imagen 2 de 2
    • Gently pry the plug off the port on the circuit board with a plastic opening tool.

    • Remove the four 2 mm screws using a T4 screwdriver.

    • Remove the circuit board from the device.

  6. 360fly 4K Lens Replacement: paso 6, imagen 1 de 3 360fly 4K Lens Replacement: paso 6, imagen 2 de 3 360fly 4K Lens Replacement: paso 6, imagen 3 de 3
    • Remove the five 4 mm screws around the battery assembly with a T4 screwdriver.

    • Lift the battery assembly and gently pry the plug out of its port on the board below with a plastic opening tool.

    • Press the battery from the back of the battery assembly to remove it with a plastic opening tool until the glue releases the battery.

    • Potential for device damage: Do not puncture or bend the battery. Use a small amount of heat to assist in softening the adhesive if necessary.

  7. 360fly 4K Lens Replacement, SD Card: paso 7, imagen 1 de 1
    • Gently pry the plug from the motherboard and remove the motherboard from the assembly.

  8. 360fly 4K Lens Replacement: paso 8, imagen 1 de 1
    • Remove the three 3 mm screws from the circuit assembly with a T4 screwdriver.

  9. 360fly 4K Lens Replacement: paso 9, imagen 1 de 1
    • Gently pry out the plug from the circuit assembly.

  10. 360fly 4K Lens Replacement: paso 10, imagen 1 de 1
    • Press and release the SD card to remove it from the circuit assembly.

  11. 360fly 4K Lens Replacement, Lens: paso 11, imagen 1 de 1
    • Unscrew the five 3mm screws with a T4 screwdriver.

  12. 360fly 4K Lens Replacement: paso 12, imagen 1 de 1
    • Gently push against the lens module to remove it from the 360fly 4K assembly.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Jacob Herron

Miembro Desde 11/08/17

463 Reputación

3 Guías creadas

Equipo

IUPUI, Team S5-G3, Baechle Fall 2017 Miembro de IUPUI, Team S5-G3, Baechle Fall 2017

IUPUI-BAECHLE-F17S5G3

3 Miembros

3 Guías creadas

4 comentarios

Hi. Where to get a replacement lens as I am in need for this repair, but 360fly offer a full service for $150 and do not sell spare lenses. Thx

anguel nakov - Contestar

There is no info where to buy the replacement lens.

gelo3000 - Contestar

Anyone know about usb pinout? I lost my charger adapter

Nuri Can PEHLİVAN - Contestar

Hi.

I inadvertently found your question.

I have this same problem.

I've lost the charger, too, and now I'm looking for a chance to charge without a base, or a chance to buy a base.

Imants

Imants R -

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 9

Todo El Tiempo: 1,568