Repara tus cosas Comunidad Tienda

2018 Honda Fit Wiper Blades Replacement

Introducción

Every car has to have the wiper blades replaced at some point. I usually replace mine about every 6 months. This guide will explain how to replace the front wiper blades on a 2018 Honda Fit.

Before using this guide, be sure to check what size wiper blades are required. I recommend asking for assistance once you go to purchase the wiper blades from a professional, who will be able to offer the best deals and quality of wiper blades. On a 2018 Honda Fit, the front blades are usually 28" on the driver's side and 13-14" on the passenger side.

Qué necesitas

  1. 2018 Honda Fit Wiper Blades Replacement, Wiper Blades: paso 1, imagen 1 de 2 2018 Honda Fit Wiper Blades Replacement, Wiper Blades: paso 1, imagen 2 de 2

    • Turn ON the car.

    • Turn on the windshield wipers until they are at the halfway mark on the windshield.

    • Without turning off the windshield wipers, turn OFF the car.

    Traducir

  2. 2018 Honda Fit Wiper Blades Replacement: paso 2, imagen 1 de 2 2018 Honda Fit Wiper Blades Replacement: paso 2, imagen 2 de 2

    • Place either cardboard or a floormat with the soft side on the windshield.

    • This will protect the windshield from any damage.

    • Raise the wipers until they no longer move.

    Traducir

  3. 2018 Honda Fit Wiper Blades Replacement: paso 3, imagen 1 de 2 2018 Honda Fit Wiper Blades Replacement: paso 3, imagen 2 de 2

    • Look for a button on the arm of the wiper near the "J" shaped hook and push it.

    • Slide the wiper blade off of the arm.

    Traducir

  5. 2018 Honda Fit Wiper Blades Replacement: paso 4, imagen 1 de 2 2018 Honda Fit Wiper Blades Replacement: paso 4, imagen 2 de 2

    • Install new wiper blades by squeezing the middle part until the latch opens.

    Traducir

  6. 2018 Honda Fit Wiper Blades Replacement: paso 5, imagen 1 de 3 2018 Honda Fit Wiper Blades Replacement: paso 5, imagen 2 de 3 2018 Honda Fit Wiper Blades Replacement: paso 5, imagen 3 de 3

    • Guide the wiper blade onto the "J" hook and close the latch.

    Traducir

  7. 2018 Honda Fit Wiper Blades Replacement: paso 6, imagen 1 de 2 2018 Honda Fit Wiper Blades Replacement: paso 6, imagen 2 de 2

    • Remove the cardboard or floormat from the windshield.

    • Carefully place the wipers back onto windshield.

    Traducir

  8. 2018 Honda Fit Wiper Blades Replacement: paso 7, imagen 1 de 1

    • Turn the car ON.

    • Turn wipers ON until they are back in the original position. Turn OFF the wipers.

    • Turn the car OFF.

    Traducir
Linea de Meta

Una persona más ha completado esta guía.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 4

Ultimos 7 días: 16

Ultimos 30 días: 47

Todo El Tiempo: 264