2017 Honda Accord Headlight Replacement - Guía de reparación iFixit

Introducción

This guide will show you how to replace the headlight of a 2017 Honda Accord. Prior knowledge of how to use a ratchet wrench and basic car maintenance is required.

Qué necesitas

Paso 1 Headlight

2017 Honda Accord Headlight Replacement, Headlight: paso 1, imagen 1 de 3

2017 Honda Accord Headlight Replacement, Headlight: paso 1, imagen 2 de 3

2017 Honda Accord Headlight Replacement, Headlight: paso 1, imagen 3 de 3

Pull the Hood Latch lever inside the car, located under the steering wheel.
Lift the hood while pressing up on the lever under the front of the hood.

Paso 2

2017 Honda Accord Headlight Replacement: paso 2, imagen 1 de 2

2017 Honda Accord Headlight Replacement: paso 2, imagen 2 de 2

Lift up the hood prop rod and insert it into the hole on the underside of the hood.

Paso 3

2017 Honda Accord Headlight Replacement: paso 3, imagen 1 de 2

2017 Honda Accord Headlight Replacement: paso 3, imagen 2 de 2

Use a 1/4" ratcheting wrench and a 10mm socket to loosen the bolt on the negative terminal head.
Lift the terminal up off of the battery and place it to the side.

Paso 4

2017 Honda Accord Headlight Replacement: paso 4, imagen 1 de 1

Use the clip remover tool to pry the clip up to remove it.

Paso 5

2017 Honda Accord Headlight Replacement: paso 5, imagen 1 de 3

2017 Honda Accord Headlight Replacement: paso 5, imagen 2 de 3

2017 Honda Accord Headlight Replacement: paso 5, imagen 3 de 3

Use a 1/4" ratcheting wrench and a 10mm socket to remove the three bolts.

Paso 6

2017 Honda Accord Headlight Replacement: paso 6, imagen 1 de 1

Use a 1/4" ratcheting wrench, a 6" extension and a 10mm socket to remove the last bolt.

Paso 7

2017 Honda Accord Headlight Replacement: paso 7, imagen 1 de 2

2017 Honda Accord Headlight Replacement: paso 7, imagen 2 de 2

Gently pull the headlight out.

Paso 8

2017 Honda Accord Headlight Replacement: paso 8, imagen 1 de 2

2017 Honda Accord Headlight Replacement: paso 8, imagen 2 de 2

Press the tab on the connector and pull. Do this for all 4 connectors.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Autor

con 1 otro colaborador

Dennis Kravtsov

Miembro Desde 10/07/19

184 Reputación

1 Guía escrita

+ 2 más insignias

Equipo

Eastern Washington University, Team S2-G5, Munoz Fall 2019 Miembro de Eastern Washington University, Team S2-G5, Munoz Fall 2019

EWU-MUNOZ-F19S2G5

2 Miembros

1 Guía escrita

0 comentarios

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 21

Ultimos 30 días: 132

Todo El Tiempo: 3,341