2013 Subaru Impreza WRX Mud Flaps Replacement - Guía de reparación iFixit

Introducción

Are your mud flaps cracked or broken? Use this guide to replace your mud flaps to look brand new.

Qué necesitas

Paso 1 Mud Flaps

2013 Subaru Impreza WRX Mud Flaps Replacement, Mud Flaps: paso 1, imagen 1 de 1

Always make sure your car is off, the parking break is applied, and you are in a safe area free from other passing cars.

Paso 2

2013 Subaru Impreza WRX Mud Flaps Replacement: paso 2, imagen 1 de 1

Turn the wheels all the way towards the side you will be working on.
This will create easier access to the inside of the wheel well when you are replacing the mud flap.

Paso 3

2013 Subaru Impreza WRX Mud Flaps Replacement: paso 3, imagen 1 de 3

2013 Subaru Impreza WRX Mud Flaps Replacement: paso 3, imagen 2 de 3

2013 Subaru Impreza WRX Mud Flaps Replacement: paso 3, imagen 3 de 3

Start with the front mud flaps.
Attach the 7/16th size socket piece to the wrench and begin removing the 7/16th diameter nuts.

Paso 4

2013 Subaru Impreza WRX Mud Flaps Replacement: paso 4, imagen 1 de 3

2013 Subaru Impreza WRX Mud Flaps Replacement: paso 4, imagen 2 de 3

2013 Subaru Impreza WRX Mud Flaps Replacement: paso 4, imagen 3 de 3

Use your Philips Head screwdriver to unscrew the farthest #6 3/4" Stainless Philips Screw.
Be careful not to loose the rubber gasket attached to the screw.

Paso 5

2013 Subaru Impreza WRX Mud Flaps Replacement: paso 5, imagen 1 de 3

2013 Subaru Impreza WRX Mud Flaps Replacement: paso 5, imagen 2 de 3

2013 Subaru Impreza WRX Mud Flaps Replacement: paso 5, imagen 3 de 3

Once the old mud flap is removed, grab your new mud flap and reattach it in the same manner as how you removed the old or broken one.
Repeat for opposite front mud flap.

Paso 6

2013 Subaru Impreza WRX Mud Flaps Replacement: paso 6, imagen 1 de 3

2013 Subaru Impreza WRX Mud Flaps Replacement: paso 6, imagen 2 de 3

2013 Subaru Impreza WRX Mud Flaps Replacement: paso 6, imagen 3 de 3

For the back two mud flaps you will need to use a slightly different technique due to the limited space you will be working in.
Use your hands and the 10mm wrench piece to unbolt the mud flap.
Once you have removed the nuts, you can move on to the #6 3/4" Philips Head Screw.
This step will be aided by the use of an extra small Philips screwdriver.

Paso 7

2013 Subaru Impreza WRX Mud Flaps Replacement: paso 7, imagen 1 de 2

2013 Subaru Impreza WRX Mud Flaps Replacement: paso 7, imagen 2 de 2

Replace both back mud flaps and fasten all pieces back in place.

Paso 8

2013 Subaru Impreza WRX Mud Flaps Replacement: paso 8, imagen 1 de 2

2013 Subaru Impreza WRX Mud Flaps Replacement: paso 8, imagen 2 de 2

Make sure the mud flaps are all properly tightened and positioned before driving your car again.
Enjoy your brand new mud flaps.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 2 otros colaboradores

Alex Davis

Miembro Desde 09/29/15

101 Reputación

1 Guía escrita

Equipo

Cal Poly, Team 14-3, Green Fall 2015 Miembro de Cal Poly, Team 14-3, Green Fall 2015

CPSU-GREEN-F15S14G3

4 Miembros

5 Guías creadas

0 comentarios

Ver Estadísticas:

Ultimas 24 horas: 4

Ultimos 7 días: 8

Ultimos 30 días: 18

Todo El Tiempo: 936