2012-Present Toyota Corolla Windshield Wiper Replacement

Introducción

This guide will teach you how to replace a windshield wiper blade on a 2012-Present Toyota Corolla. Wiper blades are constantly exposed, causing them to accumulate wear and tear over time. Using this guide, you’ll be easily able to replace your current windshield wiper blade for a new one.

Before beginning this repair, turn off the car and engage the parking brake.

Qué necesitas

Paso 1 Windshield Wiper

2012-Present Toyota Corolla Windshield Wiper Replacement, Windshield Wiper: paso 1, imagen 1 de 2

2012-Present Toyota Corolla Windshield Wiper Replacement, Windshield Wiper: paso 1, imagen 2 de 2

Lift up the windshield wiper you're replacing.

Editar

Paso 2

Insert a flathead screwdriver into the locking mechanism of the wiper and gently pry it open.
You can use your car keys in case you do not have a screwdriver.

Editar

Paso 3

Push the wiper blade downwards until it locks into place.

Editar

Paso 4

Angle the wiper away from you, so that the top is near you while the bottom is farther away.
Gently push the blade out of the wiper base.

Editar

Paso 5

Bring the new wiper blade into the wiper base from the car, aiming it so that the wiper base enters the lock hole.
Once the wiper blade is in, hold it from the bottom and push it upwards to secure the hold.
Make sure to start with the lock open, and that the blade is facing the same direction as the picture.