Repara tus cosas Comunidad Tienda

2011 Mazda 3 Car Speaker Replacement

Introducción

This guide is for base model Mazda 3 owners who need to replace their factory OEM door speakers.

Perform this repair while the car is off.

The speaker in this guide is a component speaker, so they do not require any wire cutting or soldering.

Qué necesitas

  1. 2011 Mazda 3 Car Speaker Replacement, 2011 Mazda 3 Car Speaker: paso 1, imagen 1 de 3 2011 Mazda 3 Car Speaker Replacement, 2011 Mazda 3 Car Speaker: paso 1, imagen 2 de 3 2011 Mazda 3 Car Speaker Replacement, 2011 Mazda 3 Car Speaker: paso 1, imagen 3 de 3

    • Pry the door handle cover upwards using a flathead screwdriver.

    • Remove the cover to expose the screw.

    Editar

  2. 2011 Mazda 3 Car Speaker Replacement: paso 2, imagen 1 de 2 2011 Mazda 3 Car Speaker Replacement: paso 2, imagen 2 de 2

    • Pull the door handle towards you.

    • Insert a small flathead screwdriver between the lock and the plate.

    • Pry the plate off by applying leverage away from the lock, exposing the second screw.

    Editar

  3. 2011 Mazda 3 Car Speaker Replacement: paso 3, imagen 1 de 2 2011 Mazda 3 Car Speaker Replacement: paso 3, imagen 2 de 2

    • Remove both screws with a Phillips #1 screwdriver.

    • The screws are 12mm Phillip's head. Part number (9986-50-516S).

    Editar

  5. 2011 Mazda 3 Car Speaker Replacement: paso 4, imagen 1 de 1

    • Pry the door cover away from the frame using a heavy-duty spudger.

    • The door cover will not be removed entirely in this step.

    • Prying the door off takes substantial force; moving around the door's perimeter will help unhook the clips that line the panel.

    Editar

  6. 2011 Mazda 3 Car Speaker Replacement: paso 5, imagen 1 de 2 2011 Mazda 3 Car Speaker Replacement: paso 5, imagen 2 de 2

    • Push the switch panel out from the inside of the door cover.

    • Ensure the car is off before proceeding.

    • Remove the wires connected to the panel by pressing the clips and pulling them outward.

    • Remove the door cover.

    Editar

  7. 2011 Mazda 3 Car Speaker Replacement: paso 6, imagen 1 de 1

    • Use a Phillips #1 screwdriver to remove the four screws that secure the door speaker.

    • The screws are 10mm Phillip's head. Part number (9984-50-616).

    Editar

  8. 2011 Mazda 3 Car Speaker Replacement: paso 7, imagen 1 de 1

    • Remove the wires connecting the speaker by pressing the clip and pulling it outward.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 19

Ultimos 30 días: 83

Todo El Tiempo: 2,380