Qué necesitas
-
-
Drain oil from oil pan until flow comes to a slow drip.
-
Remove the oil filter from the Engine Oil Cooler assembly, and replace Oil Filter and O-Ring with new parts.
-
Tighten Oil Filter Cap down to 25 N-m.
-
Replace oil pan drain plug with new part and torque down to 14 N-m.
-
Pour 4.25 quarts of engine motor oil into by removing the oil filler cap on top of cylinder head.
-
Tighten oil filler cap down tightly.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancelar: No complete esta guía.
Una persona más ha completado esta guía.
