Saltar al contenido principal

2007 Honda CR-V Brake Light Replacement

Qué necesitas

  1. 2007 Honda CR-V Brake Light Replacement, Brake Light: paso 1, imagen 1 de 3 2007 Honda CR-V Brake Light Replacement, Brake Light: paso 1, imagen 2 de 3 2007 Honda CR-V Brake Light Replacement, Brake Light: paso 1, imagen 3 de 3
    • Grab the handle in the middle of the trunk.

    • Use the handle to pull the trunk open.

  2. 2007 Honda CR-V Brake Light Replacement: paso 2, imagen 1 de 2 2007 Honda CR-V Brake Light Replacement: paso 2, imagen 2 de 2
    • Use a Phillips #00 screwdriver to remove the top and bottom screws.

  3. 2007 Honda CR-V Brake Light Replacement: paso 3, imagen 1 de 2 2007 Honda CR-V Brake Light Replacement: paso 3, imagen 2 de 2
    • Pull back the tail light cover.

    • Hold it up; there are cords connected to the car inside.

  4. 2007 Honda CR-V Brake Light Replacement: paso 4, imagen 1 de 3 2007 Honda CR-V Brake Light Replacement: paso 4, imagen 2 de 3 2007 Honda CR-V Brake Light Replacement: paso 4, imagen 3 de 3
    • Untwist the faulty bulb counter-clockwise.

    • Pull the bulb out of the socket.

  5. 2007 Honda CR-V Brake Light Replacement: paso 5, imagen 1 de 2 2007 Honda CR-V Brake Light Replacement: paso 5, imagen 2 de 2
    • Disconnect the bulb from the cord by popping it off.

  6. 2007 Honda CR-V Brake Light Replacement: paso 6, imagen 1 de 2 2007 Honda CR-V Brake Light Replacement: paso 6, imagen 2 de 2
    • Pop in the Sylvania LongLife Mini Bulb 7443LL.

  7. 2007 Honda CR-V Brake Light Replacement: paso 7, imagen 1 de 3 2007 Honda CR-V Brake Light Replacement: paso 7, imagen 2 de 3 2007 Honda CR-V Brake Light Replacement: paso 7, imagen 3 de 3
    • Insert the bulb into the socket.

    • Twist the bulb in clockwise.

  8. 2007 Honda CR-V Brake Light Replacement: paso 8, imagen 1 de 2 2007 Honda CR-V Brake Light Replacement: paso 8, imagen 2 de 2
    • Set the tail light cover back to the default position over the screw holes.

  9. 2007 Honda CR-V Brake Light Replacement: paso 9, imagen 1 de 2 2007 Honda CR-V Brake Light Replacement: paso 9, imagen 2 de 2
    • Use a Phillips #00 screwdriver to screw in the top and bottom screws.

Linea de Meta

Dillon Laney

Miembro Desde 02/21/23

169 Reputación

1 Guía escrita

Un comentario

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 4

Ultimos 7 días: 31

Ultimos 30 días: 111

Todo El Tiempo: 1,007