Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Locate the two grey latches on each side of the hood near the headlights.
-
Pull the latches away from the hood to release the latches.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Reach underneath the hood and push up on the lever located in the front center of the hood. You can now open the hood.
-
Prop the hood open by inserting the hood support rod into the designated hole on the underside of the hood.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Locate the air filter box in front of the car battery. It will have a 4-inch diameter hose coming out of one side (towards the center of the vehicle) and an air release coming out of the other side. It should have four clamps keeping it sealed.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Locate the four clips keeping the air filter box sealed. Their locations are as follows:
-
Back Left Corner (near the outer edge of the hood) [picture 1]
-
Front Left Corner (near the outer edge of the hood) [picture 1]
-
Back Right Corner (underneath the four-inch diameter hose) [picture 2]
-
Bottom Right Corner (near the steering fluid container in the front) [picture 3]
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
To unlock the air filter box, grasp each clip and pull the clip away from the air filter box.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
After you have removed the 4 clips, carefully pull and twist the cover off. You now have access to the air filter.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the dirty air filter by pulling the air filter straight up. Place the new replacement filter in the empty slot.
-
Cancelar: No complete esta guía.
2 personas más completaron esta guía.
Equipo
Cal Poly, Team 7-51, Forte Fall 2012 Miembro de Cal Poly, Team 7-51, Forte Fall 2012
CPSU-FORTE-F12S7G51
5 Miembros
9 Guías creadas
