Repara tus cosas Comunidad Tienda

2006-2013 Toyota Corolla Ignition Coil Replacement

Introducción

This is a guide to remove an old ignition coil and install a new one. This is standard maintenance for this vehicle and can be preformed with just a socket wrench with a ten millimeter head.

Qué necesitas

  1. 2006-2013 Toyota Corolla Ignition Coil Replacement, Ignition Coil: paso 1, imagen 1 de 3 2006-2013 Toyota Corolla Ignition Coil Replacement, Ignition Coil: paso 1, imagen 2 de 3 2006-2013 Toyota Corolla Ignition Coil Replacement, Ignition Coil: paso 1, imagen 3 de 3

    • Pop the hood and remove the black plastic cover over the engine.

    • There is nothing to unscrew, or unlatch, and the cover should lift off. Once removed, the top of the engine will look like the third picture

    Editar

  2. 2006-2013 Toyota Corolla Ignition Coil Replacement: paso 2, imagen 1 de 2 2006-2013 Toyota Corolla Ignition Coil Replacement: paso 2, imagen 2 de 2

    • Unplug the ignition coil you wish to replace. The coils are numbered one though four, left to right.

    • Do not unscrew the bolt on the ignition coil before this step. It makes the electrical plug more difficult to remove

    Editar

  4. 2006-2013 Toyota Corolla Ignition Coil Replacement: paso 3, imagen 1 de 1

    • Unscrew the bolt of the coil that needs to be replaced.

    • Be sure to put the bolt in a place you will not lose it!

    Editar

  5. 2006-2013 Toyota Corolla Ignition Coil Replacement: paso 4, imagen 1 de 2 2006-2013 Toyota Corolla Ignition Coil Replacement: paso 4, imagen 2 de 2

    • Pull the coil straight up and out. It should come off of the spark plug with little resistance.

    Editar

  6. 2006-2013 Toyota Corolla Ignition Coil Replacement: paso 5, imagen 1 de 2 2006-2013 Toyota Corolla Ignition Coil Replacement: paso 5, imagen 2 de 2

    • Apply a pea-sized amount of grease to the new ignition coil. It should be all around the rubber tip around the bottom.

    • While not required, this step will make any future replacements much easier.

    Editar

  7. 2006-2013 Toyota Corolla Ignition Coil Replacement: paso 6, imagen 1 de 1

    • When inserting the new ignition coil, press down lightly to ensure it is completely in place.

    • Re-plugging in the ignition coil, and re-screw it in. This can be preformed in either order.

    • Repeat steps three through five as necessary for the other three ignition coils.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 1 otro colaborador

Henderson Gillette

Miembro Desde 09/23/23

133 Reputación

1 Guía escrita

Insignias: 3

Equipo

Austin Community College, Team 22-3, Watkins Fall 2023 Miembro de Austin Community College, Team 22-3, Watkins Fall 2023

AUSTINCC-WATKINS-F23S22G3

2 Miembros

2 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 5

Ultimos 7 días: 82

Ultimos 30 días: 307

Todo El Tiempo: 929