Introducción

Weatherproofing car window for a convertible Ford Mustang 2006. This project will assist in providing a solution for people who have noticed a lot of wind noise in their car or water leaking inside the car. This guide will ensure people will have a good condition weatherproofing car window that is ready for any rain or snow or even car wash.

Herramientas

  1. Driver side weatherproofing car window.
    • Driver side weatherproofing car window.

  2. Locate the both ends of the weather stripping.
    • Locate the both ends of the weather stripping.

    • Pull down the weather stripping from the middle.

    • In each side of the weather stripping, you will find one plastic nail.

    • Take off these two plastic nails with your hand.

    • Remove the old weather stripping.

    • Clean any dust from where you took out the old weather stripping.

    • Bring the new weather stripping.

    • Starting from both sides, push the two plastic nails into the holes.

    • Push the weather stripping from the middle with your fingers.

    • Make sure it is aligned.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 1

Últimos 30 Días: 14

Todo El Tiempo: 44