Repara tus cosas Comunidad Tienda

2004 Mazda 3 Stereo-CD Player (BN85-66-9RXA) Disassembly

Introducción

This guide will show you how to remove the front panel and the metal casing of this 2004 Mazda 3 stereo unit in order to expose the 5-disc CD drive.

Qué necesitas

  1. 2004 Mazda 3 Stereo-CD Player (BN85-66-9RXA) Disassembly, Stereo Unit: paso 1, imagen 1 de 1

    • This is the front panel of the 2004 Mazda 3 Stereo-CD Player. It's listed under the model number: BN85-66-9RXA.

    Editar

  2. 2004 Mazda 3 Stereo-CD Player (BN85-66-9RXA) Disassembly: paso 2, imagen 1 de 1

    • On the right side of the unit, designated by the letter R, remove 6 screws using a Phillips #2 screwdriver.

    Editar

  3. 2004 Mazda 3 Stereo-CD Player (BN85-66-9RXA) Disassembly: paso 3, imagen 1 de 1

    • On the left side of unit, designated by the letter L, remove 6 screws using a Phillips #2 screwdriver.

    • Gently pull on the cable to disconnect it from the front panel.

    • Now you can fully detach the front panel as well as the LCD display from the unit.

    Editar

  4. 2004 Mazda 3 Stereo-CD Player (BN85-66-9RXA) Disassembly: paso 4, imagen 1 de 1

    • On the top of the unit, remove 2 screws with a Phillips #2 screwdriver.

    • Lift and remove the top case from the unit.

    Editar

  6. 2004 Mazda 3 Stereo-CD Player (BN85-66-9RXA) Disassembly: paso 5, imagen 1 de 1

    • On the bottom of the unit, remove 2 screws with the Phillips #2 screwdriver.

    Editar

  7. 2004 Mazda 3 Stereo-CD Player (BN85-66-9RXA) Disassembly: paso 6, imagen 1 de 1

    • On the back of the unit, remove 8 screws with a Phillips #2 screwdriver.

    • Remove 1 screw with a Phillips #1 screwdriver.

    • Pull off both the bottom and top metal plates.

    Editar

  8. 2004 Mazda 3 Stereo-CD Player (BN85-66-9RXA) Disassembly: paso 7, imagen 1 de 1

    • On the front of the unit, remove 4 screws with a Phillips #2 screwdriver.

    Editar

  9. 2004 Mazda 3 Stereo-CD Player (BN85-66-9RXA) Disassembly: paso 8, imagen 1 de 1

    • On the left side of the unit, designated by the letter L, remove 2 screws with a Phillips #2 screwdriver.

    • Remove 1 screw with a Phillips #1 screwdriver.

    Editar

  10. 2004 Mazda 3 Stereo-CD Player (BN85-66-9RXA) Disassembly: paso 9, imagen 1 de 1

    • On the right side of the unit, designated by the letter R, remove 2 screws with a Phillips #2 screwdriver.

    • Pull the front metal plate off the unit. Then lift the CD drive from the lower metal case.

    Editar

  11. 2004 Mazda 3 Stereo-CD Player (BN85-66-9RXA) Disassembly, CD Drive: paso 10, imagen 1 de 1

    • Remove 2 screws with a Phillips #1 screwdriver from the front of the CD drive.

    • Very gently pull apart the top metal case from the CD drive without damaging the ribbon cable.

    Editar

  12. 2004 Mazda 3 Stereo-CD Player (BN85-66-9RXA) Disassembly: paso 11, imagen 1 de 1

    • Gently pull the ribbon cable from the connector on the CD drive logic board.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Autor

con 2 otros colaboradores

Robin Nystrom

Miembro Desde 06/13/16

182 Reputación

1 Guía escrita

Insignias: 4

+1 mas insignia

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 12

Ultimos 30 días: 39

Todo El Tiempo: 4,985