Saltar al contenido principal

2002-2007 Jeep Liberty Rear Indicator Light Replacement

Qué necesitas

  1. 2002-2007 Jeep Liberty Rear Indicator Light Replacement, 2002-2007 Jeep Liberty Rear Indicator Light: paso 1, imagen 1 de 1
    • Open the vehicle's rear door to access the tail light assembly.

  2. 2002-2007 Jeep Liberty Rear Indicator Light Replacement: paso 2, imagen 1 de 2 2002-2007 Jeep Liberty Rear Indicator Light Replacement: paso 2, imagen 2 de 2
    • Use the T-20 Torx screwdriver to unscrew the two screws holding the tail light cover.

  3. 2002-2007 Jeep Liberty Rear Indicator Light Replacement: paso 3, imagen 1 de 2 2002-2007 Jeep Liberty Rear Indicator Light Replacement: paso 3, imagen 2 de 2
    • Remove cover by pulling out and away from car.

    • The cover is fastened with two plastic alignment pins.

  4. 2002-2007 Jeep Liberty Rear Indicator Light Replacement: paso 4, imagen 1 de 3 2002-2007 Jeep Liberty Rear Indicator Light Replacement: paso 4, imagen 2 de 3 2002-2007 Jeep Liberty Rear Indicator Light Replacement: paso 4, imagen 3 de 3
    • Twist the middle socket counter-clockwise.

    • Pull the socket out of the tail light assembly to access bulb.

  5. 2002-2007 Jeep Liberty Rear Indicator Light Replacement: paso 5, imagen 1 de 2 2002-2007 Jeep Liberty Rear Indicator Light Replacement: paso 5, imagen 2 de 2
    • Grasp the lightbulb and pull it out of the socket.

Conclusión

To reassemble your device, follow these instructions in reverse order.

3 personas más completaron esta guía.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 4

Ultimos 7 días: 23

Ultimos 30 días: 91

Todo El Tiempo: 5,061