Saltar al contenido principal

1999-2004 Jeep Grand Cherokee Headlamp Unit Replacement

Qué necesitas

  1. 1999-2004 Jeep Grand Cherokee Headlamp Unit Replacement, Headlamp Unit: paso 1, imagen 1 de 3 1999-2004 Jeep Grand Cherokee Headlamp Unit Replacement, Headlamp Unit: paso 1, imagen 2 de 3 1999-2004 Jeep Grand Cherokee Headlamp Unit Replacement, Headlamp Unit: paso 1, imagen 3 de 3
    • Here is the Jeep GC. Removal of the headlamp is identical for both sides.

    • By opening the hood and looking straight down on the headlamp assembly, the 6mm hex head jack screw can be seen.

    • Use a 6mm socket and nut driver to remove the jack screw. 1/4 socket will not fit 9/32 does, but it is a bit sloppy

  2. 1999-2004 Jeep Grand Cherokee Headlamp Unit Replacement: paso 2, imagen 1 de 3 1999-2004 Jeep Grand Cherokee Headlamp Unit Replacement: paso 2, imagen 2 de 3 1999-2004 Jeep Grand Cherokee Headlamp Unit Replacement: paso 2, imagen 3 de 3
    • Remove the long jack screw.

    • Grasp upper inboard and lower outboard corners of headlamp and forcefully pull headlamp outward.

    • Remove all bulb sockets from headlamp module. Separate headlamp from vehicle.

Conclusión

To reassemble your device, follow these instructions in reverse order.

6 personas más completaron esta guía.

oldturkey03

Miembro Desde 09/29/10

778,195 Reputación

118 Guías creadas

Equipo

Global Fixers Miembro de Global Fixers

Community

31 Miembros

520 Guías creadas

4 comentarios

It’s a 7mm socket

Don Marcos - Contestar

Not on mine. Just rechecked and it is a 6mm on my Jeep

oldturkey03 -

Thankful for simple instructions without any extra info or words ?

robinrogersk9 - Contestar

I’m removing it to replace fan cooling module. I heard I can cut through to get to it without disassembling the grill bumper etc

robinrogersk9 - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 13

Ultimos 30 días: 51

Todo El Tiempo: 7,527