Repara tus cosas Comunidad Tienda

1999-2006 BMW 3 Series Ignition Coils Replacement

Introducción

This tutorial will focus on the replacement of the six ignition coils of the 3 Series BMW (1999-2006) due to engine misfires. Some reasons for engine misfires can include rough idling and late shifting. The BMW series 3 (1999-2006) also needs regular replacements for the car’s ignition coils. BMW recommends replacing these ignition coils every 100,000 miles for non-turbocharged vehicles and every 45,000 miles for turbo-charged vehicles. With the help of this tutorial, you will have no problem keeping your BMW 3 series running smoothly and at its optimal performance.

Qué necesitas

  1. 1999-2006 BMW 3 Series Ignition Coils Replacement, Ignition Coils: paso 1, imagen 1 de 3 1999-2006 BMW 3 Series Ignition Coils Replacement, Ignition Coils: paso 1, imagen 2 de 3 1999-2006 BMW 3 Series Ignition Coils Replacement, Ignition Coils: paso 1, imagen 3 de 3

    • Release the hood latch by pulling the lever found in the driver foot well.

    • Open the hood.

    Editar

  2. 1999-2006 BMW 3 Series Ignition Coils Replacement: paso 2, imagen 1 de 3 1999-2006 BMW 3 Series Ignition Coils Replacement: paso 2, imagen 2 de 3 1999-2006 BMW 3 Series Ignition Coils Replacement: paso 2, imagen 3 de 3

    • Remove the oil cap and note the four bolt placements.

    Editar

  4. 1999-2006 BMW 3 Series Ignition Coils Replacement: paso 3, imagen 1 de 3 1999-2006 BMW 3 Series Ignition Coils Replacement: paso 3, imagen 2 de 3 1999-2006 BMW 3 Series Ignition Coils Replacement: paso 3, imagen 3 de 3

    • Using a 10 mm socket wrench, remove the four bolts holding down the engine covers.

    Editar

  5. 1999-2006 BMW 3 Series Ignition Coils Replacement: paso 4, imagen 1 de 3 1999-2006 BMW 3 Series Ignition Coils Replacement: paso 4, imagen 2 de 3 1999-2006 BMW 3 Series Ignition Coils Replacement: paso 4, imagen 3 de 3

    • Note the placement of each ignition coil then remove the plastic latch and disconnect each cable.

    Editar

  6. 1999-2006 BMW 3 Series Ignition Coils Replacement: paso 5, imagen 1 de 1

    • With a firm grip, remove each ignition coil and replace with the new coils respectively.

    • Repeat steps 4 to 1 for reassembly.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

4 personas más completaron esta guía.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 14

Ultimos 30 días: 101

Todo El Tiempo: 2,406