Saltar al contenido principal

1999-2007 Chevrolet Silverado High Mount Brake/Tail Lamp Installation

Qué necesitas

  1. 1999-2007 Chevrolet Silverado High Mount Brake/Tail Lamp Installation, Truck High Mount Brake/Tail Lamp: paso 1, imagen 1 de 3 1999-2007 Chevrolet Silverado High Mount Brake/Tail Lamp Installation, Truck High Mount Brake/Tail Lamp: paso 1, imagen 2 de 3 1999-2007 Chevrolet Silverado High Mount Brake/Tail Lamp Installation, Truck High Mount Brake/Tail Lamp: paso 1, imagen 3 de 3
    • Take the Philips screwdriver and remove two Philips head screws on both sides of the high mount brake lamp.

    • Be sure to store the two Philips screws in a safe place so they don't get lost.

  2. 1999-2007 Chevrolet Silverado High Mount Brake/Tail Lamp Installation: paso 2, imagen 1 de 2 1999-2007 Chevrolet Silverado High Mount Brake/Tail Lamp Installation: paso 2, imagen 2 de 2
    • Pull out the truck high mount brake/tail light housing.

    • We recommend you pull out the housing with both hands so you don't break the water tight seal.

    • If in the event that you happen you break it, you may have some water leak issues so you would have to fix the high mount brake/tail lamp housing with some glue.

  3. 1999-2007 Chevrolet Silverado High Mount Brake/Tail Lamp Installation: paso 3, imagen 1 de 3 1999-2007 Chevrolet Silverado High Mount Brake/Tail Lamp Installation: paso 3, imagen 2 de 3 1999-2007 Chevrolet Silverado High Mount Brake/Tail Lamp Installation: paso 3, imagen 3 de 3
    • Remove the stock bulbs from its socket.

  4. 1999-2007 Chevrolet Silverado High Mount Brake/Tail Lamp Installation: paso 4, imagen 1 de 1
    • Replace with the LED bulb.

    • Test your new LED truck high mount brake lamps to make sure everything works.

    • If the LED lights don't light up, check the polarity by flipping the bulbs 180 degrees.

  5. 1999-2007 Chevrolet Silverado High Mount Brake/Tail Lamp Installation: paso 5, imagen 1 de 3 1999-2007 Chevrolet Silverado High Mount Brake/Tail Lamp Installation: paso 5, imagen 2 de 3 1999-2007 Chevrolet Silverado High Mount Brake/Tail Lamp Installation: paso 5, imagen 3 de 3
    • Put back the light housing and screw in the two Philips screws.

Conclusión

Test and enjoy your new LED truck high mount brake/tail replacement lights.

2 personas más completaron esta guía.

Eric Wu

Miembro Desde 01/21/15

3,357 Reputación

23 Guías creadas

2 comentarios

The problem is there are no screws to remove.

richard - Contestar

there are no screws to remove on my 3rd light I can’t change the bulb

richard - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 1

Ultimos 30 días: 27

Todo El Tiempo: 5,953